HTS CodeDescriptionGeneral Rate
7201Pig iron and spiegeleisen in pigs, blocks or other primary forms:N/A7201.10.00.00Nonalloy pig iron containing by weight 0.5 percent or less of phosphorusFree7201.20.00.00Nonalloy pig iron containing by weight more than 0.5 percent of phosphorusFree7201.50Alloy pig iron; spiegeleisen:N/A7201.50.30.00Alloy pig ironFree7201.50.60.00SpiegeleisenFree7202Ferroalloys:N/A7202.11Containing by weight more than 2 percent of carbon:N/A7202.11.10.00Containing by weight more than 2 percent but not more than 4 percent of carbon1.4%7202.11.50.00Containing by weight more than 4 percent of carbon1.5%7202.19Other:N/A7202.19.10.00Containing by weight not more than 1 percent of carbon2.3%7202.19.50.00Containing by weight more than 1 percent but not more than 2 percent of carbon1.4%7202.21Containing by weight more than 55 percent of silicon:N/A7202.21.10.00Containing by weight more than 3 percent of calcium1.1%7202.21.50.00Other1.5%7202.21.75.00Containing by weight more than 80 percent but not more than 90 percent of silicon1.9%7202.21.90.00Containing by weight more than 90 percent of silicon5.8%7202.29.00OtherFree7202.29.00.10Containing by weight over 2 percent of magnesiumN/A7202.29.00.50OtherN/A7202.30.00.00Ferrosilicon manganese3.9%7202.41.00.00Containing by weight more than 4 percent of carbon1.9%7202.49Other:N/A7202.49.10.00Containing by weight more than 3 percent of carbon1.9%7202.49.50Other3.1%7202.49.50.10Containing by weight more than 0.5 percent of carbonN/A7202.49.50.90OtherN/A7202.50.00.00Ferrosilicon chromium10%7202.60.00.00FerronickelFree7202.70.00.00Ferromolybdenum4.5%7202.80.00.00Ferrotungsten and ferrosilicon tungsten5.6%7202.91.00.00Ferrotitanium and ferrosilicon titanium3.7%7202.92.00.00Ferrovanadium4.2%7202.93Ferroniobium:N/A7202.93.40.00Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon5%7202.93.80.00Other5%7202.99Other:N/A7202.99.10.00Ferrozirconium4.2%7202.99.20.00Calcium silicon5%7202.99.80Other5%7202.99.80.20FerrophosphorusN/A7202.99.80.40OtherN/A7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:N/A7203.10.00.00Ferrous products obtained by direct reduction of iron oreFree7203.90.00.00OtherFree7204Ferrous waste and scrap; remelting scrap ingots of iron or steel:N/A7204.10.00.00Waste and scrap of cast ironFree7204.21.00.00Of stainless steelFree7204.29.00.00OtherFree7204.30.00.00Waste and scrap of tinned iron or steelFree7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundlesFree7204.41.00.20No. 1 bundlesN/A7204.41.00.40No. 2 bundlesN/A7204.41.00.60Borings, shovelings and turningsN/A7204.41.00.80OtherN/A7204.49.00OtherFree7204.49.00.20No. 1 heavy meltingN/A7204.49.00.40No. 2 heavy meltingN/A7204.49.00.60Cut plate and structuralN/A7204.49.00.70ShreddedN/A7204.49.00.80OtherN/A7204.50.00.00Remelting scrap ingotsFree7205Granules and powders, of pig iron, spiegeleisen, iron or steel:N/A7205.10.00.00GranulesFree7205.21.00.00Of alloy steelFree7205.29.00.00OtherFree7206Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):N/A7206.10.00.00IngotsFree7206.90.00.00OtherFree7207Semifinished products of iron or nonalloy steel:N/A7207.11.00.00Of rectangular (including square) cross section, the width measuring less than twice the thicknessFree7207.12.00Other, of rectangular (other than square) cross sectionFree7207.12.00.10Having a width measuring less than four times the thicknessN/A7207.12.00.50Having a width measuring at least four times the thicknessN/A7207.19.00OtherFree7207.19.00.30Of circular cross sectionN/A7207.19.00.90OtherN/A7207.20.00Containing by weight 0.25 percent or more of carbonFree7207.20.00.25Having a width measuring less than four times the thicknessN/A7207.20.00.45Having a width measuring at least four times the thicknessN/A7207.20.00.75Of circular cross sectionN/A7207.20.00.90OtherN/A7208Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:N/A7208.10In coils, not further worked than hot-rolled, with patterns in relief:N/A7208.10.15.00PickledFree7208.10.30.00Of a thickness of 4.75 mm or moreFree7208.10.60.00Of a thickness of less than 4.75 mmFree7208.25Of a thickness of 4.75 mm or more:N/A7208.25.30.00Of high-strength steelFree7208.25.60.00OtherFree7208.26.00Of a thickness of 3 mm or more but less than 4.75 mmFree7208.26.00.30High-strength steelN/A7208.26.00.60OtherN/A7208.27.00Of a thickness of less than 3 mmFree7208.27.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterN/A7208.27.00.45OtherN/A7208.27.00.60OtherN/A7208.36.00Of a thickness exceeding 10 mmFree7208.36.00.30High-strength steelN/A7208.36.00.60OtherN/A7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree7208.37.00.30High-strength steelN/A7208.37.00.60OtherN/A7208.38.00Of a thickness of 3 mm or more but less than 4.75 mmFree7208.38.00.15High-strength steelN/A7208.38.00.30With untrimmed edgesN/A7208.38.00.90OtherN/A7208.39.00Of a thickness of less than 3 mmFree7208.39.00.20“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterN/A7208.39.00.25OtherN/A7208.39.00.30With untrimmed edgesN/A7208.39.00.90OtherN/A7208.40Not in coils, not further worked than hot-rolled, with patterns in relief:N/A7208.40.30Of a thickness of 4.75 mm or moreFree7208.40.30.30Of a thickness exceeding 10 mmN/A7208.40.30.60OtherN/A7208.40.60Of a thickness of less than 4.75 mmFree7208.40.60.30Of a thickness less than 3 mmN/A7208.40.60.60OtherN/A7208.51.00Of a thickness exceeding 10 mmFree7208.51.00.30Universal mill plateN/A7208.51.00.45Of high-strength steelN/A7208.51.00.60OtherN/A7208.52.00.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree7208.53.00.00Of a thickness of 3 mm or more but less than 4.75 mmFree7208.54.00.00Of a thickness of less than 3 mmFree7208.90.00.00OtherFree7209Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:N/A7209.15.00.00Of a thickness of 3 mm or moreFree7209.16.00Of a thickness exceeding 1 mm but less than 3 mmFree7209.16.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterN/A7209.16.00.45OtherN/A7209.16.00.60OtherN/A7209.16.00.70AnnealedN/A7209.16.00.91OtherN/A7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mmFree7209.17.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterN/A7209.17.00.45OtherN/A7209.17.00.60OtherN/A7209.17.00.70AnnealedN/A7209.17.00.91OtherN/A7209.18Of a thickness of less than 0.5 mm:N/A7209.18.15Of high-strength steelFree7209.18.15.30AnnealedN/A7209.18.15.60OtherN/A7209.18.25Of a thickness of less than 0.361 mm (blackplate)Free7209.18.25.20AnnealedN/A7209.18.25.85OtherN/A7209.18.60OtherFree7209.18.60.20AnnealedN/A7209.18.60.90OtherN/A7209.25.00.00Of a thickness of 3 mm or moreFree7209.26.00.00Of a thickness exceeding 1 mm but less than 3 mmFree7209.27.00.00Of a thickness of 0.5 mm or more but not exceeding 1 mmFree7209.28.00.00Of a thickness of less than 0.5 mmFree7209.90.00.00OtherFree7210Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:N/A7210.11.00.00Of a thickness of 0.5 mm or moreFree7210.12.00.00Of a thickness of less than 0.5 mmFree7210.20.00.00Plated or coated with lead, including terne-plateFree7210.30.00Electrolytically plated or coated with zincFree7210.30.00.30Of high-strength steelN/A7210.30.00.60OtherN/A7210.41.00.00CorrugatedFree7210.49.00OtherFree7210.49.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterN/A7210.49.00.45OtherN/A7210.49.00.91Of a thickness of 0.4 mm or moreN/A7210.49.00.95OtherN/A7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxidesFree7210.50.00.20Of a width less than 1050 mmN/A7210.50.00.90OtherN/A7210.61.00.00Plated or coated with aluminum-zinc alloysFree7210.69.00.00OtherFree7210.70Painted, varnished or coated with plastics:N/A7210.70.30.00Not coated or plated with metal and not cladFree7210.70.60OtherFree7210.70.60.30Electrolytically coated or platedN/A7210.70.60.60OtherN/A7210.70.60.90OtherN/A7210.90Other:N/A7210.90.10.00CladFree7210.90.60.00Electrolytically coated or plated with base metalFree7210.90.90.00OtherFree7211Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:N/A7211.13.00.00Universal mill plateFree7211.14.00Other, of a thickness of 4.75 mm or moreFree7211.14.00.30Of high-strength steelN/A7211.14.00.45Not in coilsN/A7211.14.00.90OtherN/A7211.19Other:N/A7211.19.15.00Of high-strength steelFree7211.19.20.00Of a thickness exceeding 1.25 mmFree7211.19.30.00OtherFree7211.19.45.00Of high-strength steelFree7211.19.60.00PickledFree7211.19.75OtherFree7211.19.75.30With untrimmed edgesN/A7211.19.75.60OtherN/A7211.19.75.90OtherN/A7211.23Containing by weight less than 0.25 percent of carbon:N/A7211.23.15.00Of high-strength steelFree7211.23.20.00OtherFree7211.23.30.00Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree7211.23.45.00Of a thickness not exceeding 0.25 mmFree7211.23.60OtherFree7211.23.60.30Of a thickness exceeding 1.25 mmN/A7211.23.60.60Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmN/A7211.23.60.90Of a thickness not exceeding 0.25 mm:N/A7211.29Other:N/A7211.29.20Of a thickness exceeding 0.25 mmFree7211.29.20.30Of a width less than 51 mm, in coilsN/A7211.29.20.90OtherN/A7211.29.45.00OtherFree7211.29.60OtherFree7211.29.60.30Of a thickness exceeding 1.25 mmN/A7211.29.60.80OtherN/A7211.90.00.00OtherFree7212Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:N/A7212.10.00.00Plated or coated with tinFree7212.20.00.00Electrolytically plated or coated with zincFree7212.30Otherwise plated or coated with zinc:N/A7212.30.10Of a thickness exceeding 0.25 mm or moreFree7212.30.10.30Of a width less than 51 mm, in coilsN/A7212.30.10.90OtherN/A7212.30.30.00OtherFree7212.30.50.00OtherFree7212.40Painted, varnished or coated with plastics:N/A7212.40.10.00Of a width of less than 300 mmFree7212.40.50.00OtherFree7212.50.00.00Otherwise plated or coatedFree7212.60.00.00CladFree7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:N/A7213.10.00.00Concrete reinforcing bars and rodsFree7213.20.00Other, of free-cutting steelFree7213.20.00.10Containing by weight 0.1 percent or more of leadN/A7213.20.00.80OtherN/A7213.91Of circular cross section measuring less than 14 mm in diameter:N/A7213.91.30Not tempered, not treated and not partly manufacturedFree7213.91.30.11Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapterN/A7213.91.30.15Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapterN/A7213.91.30.20Of welding quality wire rods of a kind described in statistical note 7 to this chapterN/A7213.91.30.93OtherN/A7213.91.45.00Containing by weight 0.6 percent or more of carbonFree7213.91.60.00OtherFree7213.99.00OtherFree7213.99.00.30With a diameter of 14 mm or more but less than 19 mmN/A7213.99.00.60With a diameter of 19 mm or moreN/A7213.99.00.90OtherN/A7214Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:N/A7214.10.00.00ForgedFree7214.20.00.00Concrete reinforcing bars and rodsFree7214.30.00Other, of free-cutting steelFree7214.30.00.10Containing by weight 0.1 percent or more of leadN/A7214.30.00.80OtherN/A7214.91.00Of rectangular (other than square) cross-sectionFree7214.91.00.16With a maximum cross section less than 152 mmN/A7214.91.00.20With a maximum cross section of 152 mm or moreN/A7214.91.00.60Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7214.91.00.90Containing by weight 0.6 percent or more of carbonN/A7214.99.00OtherFree7214.99.00.16With a diameter less than 76 mmN/A7214.99.00.21With a diameter of 76 mm or more but not exceeding 152 mmN/A7214.99.00.26With a diameter exceeding 152 mmN/A7214.99.00.31With a diameter less than 76 mmN/A7214.99.00.36With a diameter of 76 mm or more but not exceeding 152 mmN/A7214.99.00.40With a diameter exceeding 152 mmN/A7214.99.00.45Containing by weight 0.6 percent or more of carbonN/A7214.99.00.60Containing by weight less than 0.25 percent of carbonN/A7214.99.00.75Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7214.99.00.90Containing by weight 0.6 percent or more of carbonN/A7215Other bars and rods of iron or nonalloy steel:N/A7215.10.00Of free-cutting steel, not further worked than cold-formed or cold-finishedFree7215.10.00.10Containing by weight 0.1 percent or more of leadN/A7215.10.00.80OtherN/A7215.50.00Other, not further worked than cold-formed or cold-finishedFree7215.50.00.16With a diameter or cross section measuring less than 76 mmN/A7215.50.00.18With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmN/A7215.50.00.20With a diameter or cross section exceeding 228 mmN/A7215.50.00.61With a diameter or cross section measuring less than 76 mmN/A7215.50.00.63With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmN/A7215.50.00.65With a diameter or cross section exceeding 228 mmN/A7215.50.00.90Containing by weight 0.6 percent or more of carbonN/A7215.90Other:N/A7215.90.10.00Not cold-formedFree7215.90.30.00Cold-formedFree7215.90.50.00OtherFree7216Angles, shapes and sections of iron or nonalloy steel:N/A7216.10.00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mmFree7216.10.00.10U sectionsN/A7216.10.00.50OtherN/A7216.21.00.00L sectionsFree7216.22.00.00T sectionsFree7216.31.00.00U sectionsFree7216.32.00.00I sections (standard beams)Free7216.33.00H sectionsFree7216.33.00.30Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mmN/A7216.33.00.60Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mmN/A7216.33.00.90OtherN/A7216.40.00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or moreFree7216.40.00.10L sectionsN/A7216.40.00.50OtherN/A7216.50.00.00Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extrudedFree7216.61.00.00Obtained from flat-rolled productsFree7216.69.00.00OtherFree7216.91.00Cold-formed or cold-finished from flat-rolled productsFree7216.91.00.10Drilled, notched, punched or camberedN/A7216.91.00.90OtherN/A7216.99.00OtherFree7216.99.00.10Drilled, notched, punched or camberedN/A7216.99.00.90OtherN/A7217Wire of iron or nonalloy steel:N/A7217.10Not plated or coated, whether or not polished:N/A7217.10.10.00Of a thickness not exceeding 0.25 mmFree7217.10.20.00Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree7217.10.30.00Of a thickness exceeding 1.25 mmFree7217.10.40With a diameter of less than 1.5 mmFree7217.10.40.40In coils weighing not more than 2 kilogramsN/A7217.10.40.45OtherN/A7217.10.40.90OtherN/A7217.10.50With a diameter of 1.5 mm or moreFree7217.10.50.30Heat treatedN/A7217.10.50.90OtherN/A7217.10.60.00Other wireFree7217.10.70.00Flat wireFree7217.10.80Round wireFree7217.10.80.10Heat treatedN/A7217.10.80.20OtherN/A7217.10.80.25With a diameter of less than 1.0 mmN/A7217.10.80.30With a diameter of 1.0 mm or more but less than 1.5 mmN/A7217.10.80.45With a diameter of 1.5 mm or moreN/A7217.10.80.60With a diameter of less than 1.0 mmN/A7217.10.80.75With a diameter of 1.0 mm or more but less than 1.5 mmN/A7217.10.80.90With a diameter of 1.5 mm or moreN/A7217.10.90.00Other wireFree7217.20Plated or coated with zinc:N/A7217.20.15.00Flat wireFree7217.20.30.00With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbonFree7217.20.45OtherFree7217.20.45.10Containing by weight less than 0.25 percent of carbonN/A7217.20.45.20Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7217.20.45.30Containing by weight 0.6 percent or more of carbonN/A7217.20.45.40Containing by weight less than 0.25 percent of carbonN/A7217.20.45.50Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7217.20.45.60Containing by weight 0.6 percent or more of carbonN/A7217.20.45.70Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7217.20.45.80Containing by weight 0.6 percent or more of carbonN/A7217.20.60.00Containing by weight less than 0.25 percent of carbonFree7217.20.75.00OtherFree7217.30Plated or coated with other base metals:N/A7217.30.15Flat wireFree7217.30.15.30Containing by weight 0.6 percent or more of carbonN/A7217.30.15.60OtherN/A7217.30.30.00With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbonFree7217.30.45OtherFree7217.30.45.04Containing by weight less than 0.20 percent of carbon, and suitable for electric arc weldingN/A7217.30.45.11Containing by weight less than 0.25 percent of carbonN/A7217.30.45.20Containing by weight 0.25 percent or more but less than 0.6 percent or carbonN/A7217.30.45.30Containing by weight 0.6 percent or more of carbonN/A7217.30.45.41Containing by weight less than 0.25 percent of carbonN/A7217.30.45.50Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7217.30.45.60Containing by weight 0.6 percent or more of carbonN/A7217.30.45.90With a diameter of 1.5 mm or moreN/A7217.30.60.00Containing by weight less than 0.25 percent of carbonFree7217.30.75.00OtherFree7217.90Other:N/A7217.90.10.00Coated with plasticsFree7217.90.50OtherFree7217.90.50.30Containing by weight less than 0.25 percent of carbonN/A7217.90.50.60Containing by weight 0.25 percent or more but less than 0.6 percent of carbonN/A7217.90.50.90Containing by weight 0.6 percent or more of carbonN/A7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:N/A7218.10.00.00Ingots and other primary formsFree7218.91.00Of rectangular (other than square) cross-sectionFree7218.91.00.15Having a cross-sectional area of less than 232 cm2N/A7218.91.00.30Having a cross-sectional area of 232 cm2 or moreN/A7218.91.00.60Having a width at least four times the thicknessN/A7218.99.00OtherFree7218.99.00.15Having a cross-sectional area of less than 232 cm2N/A7218.99.00.30Having a cross-sectional area of 232 cm2 or moreN/A7218.99.00.45Having a cross-sectional area of less than 232 cm2N/A7218.99.00.60Having a cross-sectional area of 232 cm2 or moreN/A7218.99.00.90OtherN/A7219Flat-rolled products of stainless steel, of a width of 600 mm or more:N/A7219.11.00Of a thickness exceeding 10 mmFree7219.11.00.30Of a width not exceeding 1575 mmN/A7219.11.00.60Of a width exceeding 1575 mmN/A7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree7219.12.00.02Not annealed or not pickledN/A7219.12.00.06Of high-nickel alloy steelN/A7219.12.00.21Of a width not exceeding 1575 mmN/A7219.12.00.26Of a width exceeding 1575 mmN/A7219.12.00.51Of a width not exceeding 1575 mmN/A7219.12.00.56Of a width exceeding 1575 mmN/A7219.12.00.66Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.12.00.71OtherN/A7219.12.00.81OtherN/A7219.13.00Of a thickness of 3 mm or more but less than 4.75 mmFree7219.13.00.02Not annealed or not pickledN/A7219.13.00.31Of a width of 1370 mm or moreN/A7219.13.00.51Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.13.00.71OtherN/A7219.13.00.81OtherN/A7219.14.00Of a thickness of less than 3 mmFree7219.14.00.30Of a width of 1370 mm or moreN/A7219.14.00.65Of high-nickel alloy steelN/A7219.14.00.90OtherN/A7219.21.00Of a thickness exceeding 10 mmFree7219.21.00.05Of high-nickel alloy steelN/A7219.21.00.20Of a width not exceeding 1575 mmN/A7219.21.00.40Of a width exceeding 1575 mm but not exceeding 1880 mmN/A7219.21.00.60Of a width exceeding 1880 mmN/A7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree7219.22.00.05Of high-nickel alloy steelN/A7219.22.00.15Of a width not exceeding 1575 mmN/A7219.22.00.20Of a width exceeding 1575 mm but not exceeding 1880 mmN/A7219.22.00.25Of a width exceeding 1880 mmN/A7219.22.00.35Of a width not exceeding 1575 mmN/A7219.22.00.40Of a width exceeding 1575 mm but not exceeding 1880 mmN/A7219.22.00.45Of a width exceeding 1880 mmN/A7219.22.00.70Of a width not exceeding 1575 mmN/A7219.22.00.75Of a width exceeding 1575 mm but not exceeding 1880 mmN/A7219.22.00.80Of a width exceeding 1880 mmN/A7219.23.00Of a thickness of 3 mm or more but less than 4.75 mmFree7219.23.00.30Of a width of 1370 mm or moreN/A7219.23.00.60OtherN/A7219.24.00Of a thickness of less than 3 mmFree7219.24.00.30Of a width of 1370 mm or moreN/A7219.24.00.60OtherN/A7219.31.00Of a thickness of 4.75 mm or moreFree7219.31.00.10In coilsN/A7219.31.00.50Not in coilsN/A7219.32.00Of a thickness of 3 mm or more but less than 4.75 mmFree7219.32.00.05Of high-nickel alloy steelN/A7219.32.00.20Containing more than 0.5 percent by weight of nickelN/A7219.32.00.25OtherN/A7219.32.00.35Of high-nickel alloy steelN/A7219.32.00.36Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.32.00.38OtherN/A7219.32.00.42Containing less than 15 percent by weight of chromiumN/A7219.32.00.44OtherN/A7219.32.00.45Of a width of 1370 mm or moreN/A7219.32.00.60OtherN/A7219.33.00Of a thickness exceeding 1 mm but less than 3 mmFree7219.33.00.05Of high-nickel alloy steelN/A7219.33.00.20Containing more than 0.5 percent by weight of nickelN/A7219.33.00.25OtherN/A7219.33.00.35Of high-nickel alloy steelN/A7219.33.00.36Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.33.00.38OtherN/A7219.33.00.42Containing less than 15 percent by weight of chromiumN/A7219.33.00.44OtherN/A7219.33.00.45Of a width of 1370 mm or moreN/A7219.33.00.70Containing more than 0.5 percent but less than 24 percent by weight of nickelN/A7219.33.00.80OtherN/A7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mmFree7219.34.00.05Of high-nickel alloy steelN/A7219.34.00.20Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.34.00.25OtherN/A7219.34.00.30Containing less than 15 percent by weight of chromiumN/A7219.34.00.35OtherN/A7219.34.00.50Not in coilsN/A7219.35.00Of a thickness of less than 0.5 mmFree7219.35.00.05Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.35.00.15OtherN/A7219.35.00.30Containing less than 15 percent by weight of chromiumN/A7219.35.00.35OtherN/A7219.35.00.50Not in coilsN/A7219.90.00OtherFree7219.90.00.10Of high-nickel alloy steelN/A7219.90.00.20Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7219.90.00.25OtherN/A7219.90.00.60Containing less than 15 percent by weight of chromiumN/A7219.90.00.80OtherN/A7220Flat-rolled products of stainless steel, of a width of less than 600 mm:N/A7220.11.00.00Of a thickness of 4.75 mm or moreFree7220.12Of a thickness of less than 4.75 mm:N/A7220.12.10.00Of a width of 300 mm or moreFree7220.12.50.00Of a width of less than 300 mmFree7220.20Not further worked than cold-rolled (cold-reduced):N/A7220.20.10Of a width of 300 mm or moreFree7220.20.10.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7220.20.10.15OtherN/A7220.20.10.60Containing less than 15 percent by weight of chromiumN/A7220.20.10.80OtherN/A7220.20.60Of a thickness exceeding 1.25 mmFree7220.20.60.05Of high-nickel alloy steelN/A7220.20.60.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7220.20.60.15OtherN/A7220.20.60.60Containing less than 15 percent by weight of chromiumN/A7220.20.60.80OtherN/A7220.20.70Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree7220.20.70.05Of high-nickel alloy steelN/A7220.20.70.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7220.20.70.15OtherN/A7220.20.70.60Containing less than 15 percent by weight of chromiumN/A7220.20.70.80OtherN/A7220.20.80.00Razor blade steelFree7220.20.90OtherFree7220.20.90.30Containing more than 0.5 percent but less than 24 percent by weight of nickelN/A7220.20.90.60OtherN/A7220.90.00OtherFree7220.90.00.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7220.90.00.15OtherN/A7220.90.00.60Containing less than 15 percent by weight of chromiumN/A7220.90.00.80OtherN/A7221.00.00Bars and rods, hot-rolled, in irregularly wound coils, of stainless steelFree7221.00.00.05Of high-nickel alloy steelN/A7221.00.00.17Containing less than 8 percent by weight of nickelN/A7221.00.00.18Containing 8 percent or more but less than 24 percent by weight of nickelN/A7221.00.00.30With a diameter of 14 mm or more but less than 19 mmN/A7221.00.00.45With a diameter of 19 mm or moreN/A7221.00.00.75OtherN/A7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:N/A7222.11.00Of circular cross-sectionFree7222.11.00.01Electroslag or vacuum arc remeltedN/A7222.11.00.06Of high-nickel alloy steelN/A7222.11.00.57Containing less than 8 percent by weight of nickelN/A7222.11.00.59Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.11.00.82Containing less than 8 percent by weight of nickelN/A7222.11.00.84Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.19.00OtherFree7222.19.00.01Electroslag or vacuum arc remeltedN/A7222.19.00.06Of high-nickel alloy steelN/A7222.19.00.52Containing less than 8 percent by weight of nickelN/A7222.19.00.54Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.20.00Bars and rods, not further worked than cold-formed or cold-finishedFree7222.20.00.01Electroslag or vacuum arc remeltedN/A7222.20.00.06Of high-nickel alloy steelN/A7222.20.00.41Containing less than 8 percent by weight of nickelN/A7222.20.00.43Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.20.00.62Containing less than 8 percent by weight of nickelN/A7222.20.00.64Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.20.00.67Containing less than 8 percent by weight of nickelN/A7222.20.00.69Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.20.00.71Containing less than 8 percent by weight of nickelN/A7222.20.00.73Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.30.00Other bars and rodsFree7222.30.00.01Electroslag or vacuum arc remeltedN/A7222.30.00.12Of high-nickel alloy steelN/A7222.30.00.22Containing less than 8 percent by weight of nickelN/A7222.30.00.24Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.30.00.82Containing less than 8 percent by weight of nickelN/A7222.30.00.84Containing 8 percent or more but less than 24 percent by weight of nickelN/A7222.40Angles, shapes and sections:N/A7222.40.30Hot-rolled, not drilled, not punched and not otherwise advancedFree7222.40.30.25AnglesN/A7222.40.30.45OtherN/A7222.40.30.65AnglesN/A7222.40.30.85OtherN/A7222.40.60.00OtherFree7223.00Wire of stainless steel:N/A7223.00.10Round wireFree7223.00.10.05Spring round wire of a kind described in statistical note 8 to this chapterN/A7223.00.10.16With a diameter of less than 0.25 mmN/A7223.00.10.31With a diameter of 0.25 mm or more but less than 0.76 mmN/A7223.00.10.46With a diameter of 0.76 mm or more but less than 1.52 mmN/A7223.00.10.61With a diameter of 1.52 mm or more but less than 5.1 mmN/A7223.00.10.76With a diameter of 5.1 mm or moreN/A7223.00.50.00Flat wireFree7223.00.90.00OtherFree7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:N/A7224.10.00Ingots and other primary formsFree7224.10.00.05Of high-nickel alloy steelN/A7224.10.00.45Of tool steelN/A7224.10.00.75OtherN/A7224.90.00OtherFree7224.90.00.05Of high-nickel alloy steelN/A7224.90.00.15Having a width less than four times the thicknessN/A7224.90.00.25Having a width at least four times the thicknessN/A7224.90.00.35OtherN/A7224.90.00.45Having a width less than four times the thicknessN/A7224.90.00.55Having a width at least four times the thicknessN/A7224.90.00.65Of circular cross sectionN/A7224.90.00.75OtherN/A7225Flat-rolled products of other alloy steel, of a width of 600 mm or more:N/A7225.11.00.00Grain-orientedFree7225.19.00.00OtherFree7225.30Other, not further worked than hot-rolled, in coils:N/A7225.30.11Of tool steelFree7225.30.11.10Of high-speed steelN/A7225.30.11.80OtherN/A7225.30.30OtherFree7225.30.30.05Of high-nickel alloy steelN/A7225.30.30.50OtherN/A7225.30.51Of tool steelFree7225.30.51.10Of high-speed steelN/A7225.30.51.80OtherN/A7225.30.70.00OtherFree7225.40Other, not further worked than hot-rolled, not in coils:N/A7225.40.11Of tool steelFree7225.40.11.10Of high-speed steelN/A7225.40.11.80OtherN/A7225.40.30OtherFree7225.40.30.05Of high-nickel alloy steelN/A7225.40.30.50OtherN/A7225.40.51Of tool steelFree7225.40.51.10Of high-speed steelN/A7225.40.51.30Of ball-bearing steelN/A7225.40.51.60OtherN/A7225.40.70.00OtherFree7225.50Other, not further worked than cold-rolled (cold-reduced):N/A7225.50.11Of tool steelFree7225.50.11.10Of high-speed steelN/A7225.50.11.30Of ball-bearing steelN/A7225.50.11.60OtherN/A7225.50.60.00Of a thickness of 4.75 mm or moreFree7225.50.70.00Heat-resisting steelFree7225.50.80OtherFree7225.50.80.10Of high-nickel alloy steelN/A7225.50.80.80OtherN/A7225.91.00.00Electrolytically plated or coated with zincFree7225.92.00.00Otherwise plated or coated with zincFree7225.99.00OtherFree7225.99.00.10Of high-nickel alloy steelN/A7225.99.00.90OtherN/A7226Flat-rolled products of other alloy steel, of a width of less than 600 mm:N/A7226.11Grain-oriented:N/A7226.11.10.00Of a width of 300 mm or moreFree7226.11.90Of a width of less than 300 mmFree7226.11.90.30Of thickness not exceeding 0.25 mmN/A7226.11.90.60OtherN/A7226.19Other:N/A7226.19.10.00Of a width of 300 mm or moreFree7226.19.90.00Of a width of less than 300 mmFree7226.20.00.00Of high-speed steelFree7226.91Not further worked than hot-rolled:N/A7226.91.05.00Of chipper knife steelFree7226.91.15Of a width of 300 mm or moreFree7226.91.15.30Of ball-bearing steelN/A7226.91.15.60OtherN/A7226.91.25Of a width of less than 300 mmFree7226.91.25.30Of ball-bearing steelN/A7226.91.25.60OtherN/A7226.91.50.00Of a thickness of 4.75 mm or moreFree7226.91.70.00Of a width of 300 mm or moreFree7226.91.80.00Of a width of less than 300 mmFree7226.92Not further worked than cold-rolled (cold-reduced):N/A7226.92.10Of a width of 300 mm or moreFree7226.92.10.30Of ball-bearing steelN/A7226.92.10.60OtherN/A7226.92.30Of a width of less than 300 mmFree7226.92.30.30Of ball-bearing steelN/A7226.92.30.60OtherN/A7226.92.50.00Of a width of 300 mm or moreFree7226.92.70Of a thickness not exceeding 0.25 mmFree7226.92.70.05Of high-nickel alloy steelN/A7226.92.70.50OtherN/A7226.92.80Of a thickness exceeding 0.25 mmFree7226.92.80.05Of high-nickel alloy steelN/A7226.92.80.50OtherN/A7226.99.01OtherFree7226.99.01.10Electrolytically plated or coated with zincN/A7226.99.01.30Otherwise plated or coated with zincN/A7226.99.01.80OtherN/A7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:N/A7227.10.00.00Of high-speed steelFree7227.20.00Of silico-manganese steelFree7227.20.00.30Of welding quality wire rods of a kind described in statistical note 7 to this chapterN/A7227.20.00.80OtherN/A7227.90Other:N/A7227.90.10Not tempered, not treated, and not partly manufacturedFree7227.90.10.30Of ball-bearing steelN/A7227.90.10.60OtherN/A7227.90.20OtherFree7227.90.20.30Of ball-bearing steelN/A7227.90.20.60OtherN/A7227.90.60OtherFree7227.90.60.05Of high-nickel alloy steelN/A7227.90.60.10Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapterN/A7227.90.60.20Of welding quality wire rods of a kind described in statistical note 7 to this chapterN/A7227.90.60.30With a diameter of less than 14 mmN/A7227.90.60.35With a diameter of 14 mm or more but less than 19 mmN/A7227.90.60.40With a diameter of 19 mm or moreN/A7227.90.60.90OtherN/A7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:N/A7228.10.00Bars and rods, of high-speed steelFree7228.10.00.10Not cold-formedN/A7228.10.00.30With a maximum cross-sectional dimension of less than 18 mmN/A7228.10.00.60With a maximum cross-sectional dimension of 18 mm or moreN/A7228.20Bars and rods, of silico-manganese steel:N/A7228.20.10.00Not cold-formedFree7228.20.50.00Cold-formedFree7228.30Of tool steel (other than high-speed steel):N/A7228.30.20.00Of ball-bearing steelFree7228.30.40.00Of chipper knife steel, not cold-formedFree7228.30.60.00OtherFree7228.30.80OtherFree7228.30.80.05Of high-nickel alloy steelN/A7228.30.80.10Concrete reinforcing bars and rodsN/A7228.30.80.15With a diameter or cross section measuring less than 76 mmN/A7228.30.80.41With a diameter or cross section measuring 76 mm or more but not exceeding 152 mmN/A7228.30.80.45With a diameter or cross section measuring 152 mm or more but not exceeding 228 mmN/A7228.30.80.70With a diameter or cross section exceeding 228 mmN/A7228.40.00.00Other bars and rods, not further worked than forgedFree7228.50Other bars and rods, not further worked than cold-formed or cold-finished:N/A7228.50.10Of tool steel (other than high-speed steel)Free7228.50.10.10Of ball-bearing steelN/A7228.50.10.20Of round or rectangular cross section with surfaces ground, milled or polishedN/A7228.50.10.40OtherN/A7228.50.10.60Of round or rectangular cross section with surfaces ground, milled or polishedN/A7228.50.10.80OtherN/A7228.50.50OtherFree7228.50.50.05Of high-nickel alloy steelN/A7228.50.50.15With a diameter or cross section measuring less than 76 mmN/A7228.50.50.40With a diameter or cross section measuring 76 mm or more but not exceeding 228 mmN/A7228.50.50.70With a diameter or cross section exceeding 228 mmN/A7228.60Other bars and rods:N/A7228.60.10Of tool steel (other than high-speed steel)Free7228.60.10.30Of ball-bearing steelN/A7228.60.10.60OtherN/A7228.60.60.00Not cold-formedFree7228.60.80.00Cold-formedFree7228.70Angles, shapes and sections:N/A7228.70.30Hot-rolled, not drilled, not punched and not otherwise advancedFree7228.70.30.10U, I, H and T sectionsN/A7228.70.30.20AnglesN/A7228.70.30.41OtherN/A7228.70.30.60AnglesN/A7228.70.30.81OtherN/A7228.70.60.00OtherFree7228.80.00.00Hollow drill bars and rodsFree7229Wire of other alloy steel:N/A7229.20.00Of silico-manganese steelFree7229.20.00.10Plated or coated with copperN/A7229.20.00.15OtherN/A7229.20.00.90OtherN/A7229.90Other:N/A7229.90.05.00Of high-speed steelFree7229.90.10.00Flat wireFree7229.90.50Round wireFree7229.90.50.06Plated or coated with copperN/A7229.90.50.08OtherN/A7229.90.50.16With a diameter of less than 1.0 mmN/A7229.90.50.31With a diameter of 1.0 mm or more but less than 1.5 mmN/A7229.90.50.51With a diameter of 1.5 mm or moreN/A7229.90.90.00Other wireFree7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:N/A7301.10.00.00Sheet pilingFree7301.20Angles, shapes and sections:N/A7301.20.10.00Of iron or nonalloy steelFree7301.20.50.00Of alloy steelFree7302Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:N/A7302.10Rails:N/A7302.10.10Of iron or nonalloy steelFree7302.10.10.10Standard tee rails over 30 kg per meterN/A7302.10.10.15Over 30 kg per meterN/A7302.10.10.25OtherN/A7302.10.10.35Standard tee rails over 30 kg per meterN/A7302.10.10.45Over 30 kg per meterN/A7302.10.10.55OtherN/A7302.10.10.65Railway rails for rerollingN/A7302.10.10.75OtherN/A7302.10.50Of alloy steelFree7302.10.50.20NewN/A7302.10.50.40Railway rails for rerollingN/A7302.10.50.60OtherN/A7302.30.00.00Switch blades, crossing frogs, point rods and other crossing piecesFree7302.40.00.00Fish-plates and sole platesFree7302.90Other:N/A7302.90.10.00Sleepers (cross-ties)Free7302.90.90.00OtherFree7303.00.00Tubes, pipes and hollow profiles, of cast ironFree7303.00.00.30Soil pipeN/A7303.00.00.60Pressure pipe with an inside diameter of less than 356 mmN/A7303.00.00.90OtherN/A7304Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:N/A7304.11.00Of stainless steelFree7304.11.00.20Having an outside diameter not exceeding 114.3 mmN/A7304.11.00.50Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmN/A7304.11.00.80Having an outside diameter exceeding 406.4 mmN/A7304.19Other:N/A7304.19.10Of iron or nonalloy steelFree7304.19.10.20Having an outside diameter not exceeding 114.3 mmN/A7304.19.10.30Having an outside diameter exceeding 114.3 mm but less than 215.9 mmN/A7304.19.10.45Having a wall thickness less than 12.7 mmN/A7304.19.10.60Having a wall thickness of 12.7 mm or moreN/A7304.19.10.80Having an outside diameter exceeding 406.4 mmN/A7304.19.50Of other alloy steelFree7304.19.50.20Having an outside diameter not exceeding 114.3 mmN/A7304.19.50.50Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmN/A7304.19.50.80Having an outside diameter exceeding 406.4 mmN/A7304.22.00Drill pipe of stainless steelFree7304.22.00.30Having a wall thickness not exceeding 9.5 mmN/A7304.22.00.45Having a wall thickness exceeding 9.5 mmN/A7304.22.00.60Having an outside diameter exceeding 168.3 mmN/A7304.23Other drill pipe:N/A7304.23.30.00Of iron or nonalloy steelFree7304.23.60Of alloy steelFree7304.23.60.30Having a wall thickness not exceeding 9.5 mmN/A7304.23.60.45Having a wall thickness exceeding 9.5 mmN/A7304.23.60.60Having an outside diameter exceeding 168.3 mmN/A7304.24Other, of stainless steel:N/A7304.24.30Threaded or coupledFree7304.24.30.10Having a wall thickness less than 12.7 mmN/A7304.24.30.20Having a wall thickness of 12.7 mm or moreN/A7304.24.30.30Having a wall thickness less than 12.7 mmN/A7304.24.30.40Having a wall thickness of 12.7 mm or moreN/A7304.24.30.45Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmN/A7304.24.30.80Having an outside diameter exceeding 406.4 mmN/A7304.24.40OtherFree7304.24.40.10Having a wall thickness less than 12.7 mmN/A7304.24.40.20Having a wall thickness of 12.7 mm or moreN/A7304.24.40.30Having a wall thickness less than 12.7 mmN/A7304.24.40.40Having a wall thickness of 12.7 mm or moreN/A7304.24.40.50Having a wall thickness less than 12.7 mmN/A7304.24.40.60Having a wall thickness of 12.7 mm or moreN/A7304.24.40.80Having an outside diameter exceeding 406.4 mmN/A7304.24.60TubingFree7304.24.60.15Having a wall thickness not exceeding 9.5 mmN/A7304.24.60.30Having a wall thickness exceeding 9.5 mmN/A7304.24.60.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmN/A7304.24.60.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmN/A7304.24.60.75Having an outside diameter exceeding 406.4 mmN/A7304.29Other:N/A7304.29.10Threaded or coupledFree7304.29.10.10Having a wall thickness less than 12.7 mmN/A7304.29.10.20Having a wall thickness of 12.7 mm or moreN/A7304.29.10.30Having a wall thickness less than 12.7 mmN/A7304.29.10.40Having a wall thickness of 12.7 mm or moreN/A7304.29.10.50Having a wall thickness less than 12.7 mmN/A7304.29.10.60Having a wall thickness of 12.7 mm or moreN/A7304.29.10.80Having an outside diameter exceeding 406.4 mmN/A7304.29.20OtherFree7304.29.20.10Having a wall thickness less than 12.7 mmN/A7304.29.20.20Having a wall thickness of 12.7 mm or moreN/A7304.29.20.30Having a wall thickness less than 12.7 mmN/A7304.29.20.40Having a wall thickness of 12.7 mm or moreN/A7304.29.20.50Having a wall thickness less than 12.7 mmN/A7304.29.20.60Having a wall thickness of 12.7 mm or moreN/A7304.29.20.80Having an outside diameter exceeding 406.4 mmN/A7304.29.31Threaded or coupledFree7304.29.31.10Having a wall thickness less than 12.7 mmN/A7304.29.31.20Having a wall thickness of 12.7 mm or moreN/A7304.29.31.30Having a wall thickness less than 12.7 mmN/A7304.29.31.40Having a wall thickness of 12.7 mm or moreN/A7304.29.31.50Having a wall thickness less than 12.7 mmN/A7304.29.31.60Having a wall thickness of 12.7 mm or moreN/A7304.29.31.80Having an outside diameter exceeding 406.4 mmN/A7304.29.41OtherFree7304.29.41.10Having a wall thickness less than 12.7 mmN/A7304.29.41.20Having a wall thickness of 12.7 mm or moreN/A7304.29.41.30Having a wall thickness less than 12.7 mmN/A7304.29.41.40Having a wall thickness of 12.7 mm or moreN/A7304.29.41.50Having a wall thickness less than 12.7 mmN/A7304.29.41.60Having a wall thickness of 12.7 mm or moreN/A7304.29.41.80Having an outside diameter exceeding 406.4 mmN/A7304.29.50Of iron or nonalloy steelFree7304.29.50.15Having a wall thickness not exceeding 9.5 mmN/A7304.29.50.30Having a wall thickness exceeding 9.5 mmN/A7304.29.50.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmN/A7304.29.50.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmN/A7304.29.50.75Having an outside diameter exceeding 406.4 mmN/A7304.29.61Of other alloy steelFree7304.29.61.15Having a wall thickness not exceeding 9.5 mmN/A7304.29.61.30Having a wall thickness exceeding 9.5 mmN/A7304.29.61.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmN/A7304.29.61.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmN/A7304.29.61.75Having an outside diameter exceeding 406.4 mmN/A7304.31Cold-drawn or cold-rolled (cold-reduced):N/A7304.31.30.00Hollow barsFree7304.31.60OtherFree7304.31.60.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersN/A7304.31.60.50OtherN/A7304.39.00OtherFree7304.39.00.02Having an outside diameter less than 38.1 mmN/A7304.39.00.04Having an outside diameter of 38.1 mm or more but less than 190.5 mmN/A7304.39.00.06Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmN/A7304.39.00.08Having an outside diameter exceeding 285.8 mmN/A7304.39.00.16Galvanized, having an outside diameter not exceeding 114.3 mmN/A7304.39.00.20Having an outside diameter less than 38.1 mmN/A7304.39.00.24Having a wall thickness less than 6.4 mmN/A7304.39.00.28Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmN/A7304.39.00.32Having a wall thickness exceeding 12.7 mmN/A7304.39.00.36Having a wall thickness less than 12.7 mmN/A7304.39.00.40Having a wall thickness of 12.7 mm or more but less than 19 mmN/A7304.39.00.44Having a wall thickness of 19 mm or moreN/A7304.39.00.48Having a wall thickness less than 12.7 mmN/A7304.39.00.52Having a wall thickness of 12.7 mm or more but less than 19 mmN/A7304.39.00.56Having a wall thickness of 19 mm or moreN/A7304.39.00.62Having a wall thickness less than 12.7 mmN/A7304.39.00.68Having a wall thickness of 12.7 mm or more but less than 19 mmN/A7304.39.00.72Having a wall thickness of 19 mm or moreN/A7304.39.00.76Having a wall thickness less than 19 mmN/A7304.39.00.80Having a wall thickness of 19 mm or moreN/A7304.41Cold-drawn or cold-rolled (cold-reduced):N/A7304.41.30Of an external diameter of less than 19 mmFree7304.41.30.05Of high-nickel alloy steelN/A7304.41.30.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersN/A7304.41.30.45OtherN/A7304.41.60OtherFree7304.41.60.05Of high-nickel alloy steelN/A7304.41.60.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersN/A7304.41.60.45OtherN/A7304.49.00OtherFree7304.49.00.05Of high-nickel alloy steelN/A7304.49.00.15Hollow barsN/A7304.49.00.45Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersN/A7304.49.00.60OtherN/A7304.51Cold-drawn or cold-rolled (cold-reduced):N/A7304.51.10.00Suitable for use in the manufacture of ball or roller bearingsFree7304.51.50OtherFree7304.51.50.05Of high-nickel alloy steelN/A7304.51.50.15Of heat-resisting steelN/A7304.51.50.45OtherN/A7304.51.50.60OtherN/A7304.59Other:N/A7304.59.10.00Suitable for use in the manufacture of ball or roller bearingsFree7304.59.20Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree7304.59.20.30Of heat-resisting steelN/A7304.59.20.40Having an outside diameter less than 38.1 mmN/A7304.59.20.45Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mmN/A7304.59.20.55Having an outside diameter exceeding 114.3 mm but less than 190.5 mmN/A7304.59.20.60Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmN/A7304.59.20.70Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmN/A7304.59.20.80Having an outside diameter exceeding 406.4 mmN/A7304.59.60.00Of heat-resisting steelFree7304.59.80OtherFree7304.59.80.10Having an outside diameter less than 38.1 mmN/A7304.59.80.15Having a wall thickness less than 6.4 mmN/A7304.59.80.20Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmN/A7304.59.80.25Having a wall thickness exceeding 12.7 mmN/A7304.59.80.30Having a wall thickness less than 12.7 mmN/A7304.59.80.35Having a wall thickness of 12.7 mm or more but less than 19 mmN/A7304.59.80.40Having a wall thickness of 19 mm or moreN/A7304.59.80.45Having a wall thickness less than 12.7 mmN/A7304.59.80.50Having a wall thickness of 12.7 mm or more but less than 19 mmN/A7304.59.80.55Having a wall thickness of 19 mm or moreN/A7304.59.80.60Having a wall thickness less than 12.7 mmN/A7304.59.80.65Having a wall thickness of 12.7 mm or more but less than 19 mmN/A7304.59.80.70Having a wall thickness of 19 mm or moreN/A7304.59.80.80Having an outside diameter exceeding 406.4 mmN/A7304.90Other:N/A7304.90.10.00Of iron or nonalloy steelFree7304.90.30.00Of alloy steelFree7304.90.50.00Of iron or nonalloy steelFree7304.90.70.00Of alloy steelFree7305Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:N/A7305.11Longitudinally submerged arc welded:N/A7305.11.10Of iron or nonalloy steelFree7305.11.10.30With an external diameter exceeding 406.4 mm but not exceeding 609.6 mmN/A7305.11.10.60With an external diameter exceeding 609.6 mmN/A7305.11.50.00Of alloy steelFree7305.12Other, longitudinally welded:N/A7305.12.10Of iron or nonalloy steelFree7305.12.10.30With an external diameter exceeding 406.4 mm but not exceeding 609.6 mmN/A7305.12.10.60With an external diameter exceeding 609.6 mmN/A7305.12.50.00Of alloy steelFree7305.19Other:N/A7305.19.10Of iron or nonalloy steelFree7305.19.10.30With an external diameter exceeding 406.4 mm but not exceeding 609.6 mmN/A7305.19.10.60With an external diameter exceeding 609.6 mmN/A7305.19.50.00Of alloy steelFree7305.20Casing of a kind used in drilling for oil or gas:N/A7305.20.20.00Threaded or coupledFree7305.20.40.00OtherFree7305.20.60.00Threaded or coupledFree7305.20.80.00OtherFree7305.31Longitudinally welded:N/A7305.31.20.00Tapered pipes and tubes of steel principally used as parts of illuminating articlesFree7305.31.40.00Of iron or nonalloy steelFree7305.31.60Of alloy steelFree7305.31.60.10Of stainless steelN/A7305.31.60.90OtherN/A7305.39Other:N/A7305.39.10.00Of iron or nonalloy steelFree7305.39.50.00Of alloy steelFree7305.90Other:N/A7305.90.10.00Of iron or nonalloy steelFree7305.90.50.00Of alloy steelFree7306Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:N/A7306.11.00Welded, of stainless steelFree7306.11.00.10With an outside diameter not exceeding 114.3 mmN/A7306.11.00.50With an outside diameter exceeding 114.3 mmN/A7306.19Other:N/A7306.19.10Of iron or nonalloy steelFree7306.19.10.10With an outside diameter not exceeding 114.3 mmN/A7306.19.10.50With an outside diameter exceeding 114.3 mmN/A7306.19.51Of alloy steelFree7306.19.51.10With an outside diameter not exceeding 114.3 mmN/A7306.19.51.50With an outside diameter exceeding 114.3 mmN/A7306.21Welded of stainless steel:N/A7306.21.30.00Threaded or coupledFree7306.21.40.00OtherFree7306.21.80TubingFree7306.21.80.10Imported with couplingN/A7306.21.80.50OtherN/A7306.29Other:N/A7306.29.10Threaded or coupledFree7306.29.10.30Imported with couplingN/A7306.29.10.90OtherN/A7306.29.20.00OtherFree7306.29.31.00Threaded or coupledFree7306.29.41.00OtherFree7306.29.60Of iron or nonalloy steelFree7306.29.60.10Imported with couplingN/A7306.29.60.50OtherN/A7306.29.81OtherFree7306.29.81.10Imported with couplingN/A7306.29.81.50OtherN/A7306.30Other, welded, of circular cross section, of iron or nonalloy steel:N/A7306.30.10Having a wall thickness of less than 1.65 mmFree7306.30.10.10Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
7306.30.10.90Other
7306.30.30.00Tapered steel pipes and tubes principally used as parts of illuminating articlesFree7306.30.50OtherFree7306.30.50.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawnN/A7306.30.50.15Other, cold-drawnN/A7306.30.50.20Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mmN/A7306.30.50.26With an outside diameter not exceeding 50.8 mmN/A7306.30.50.27With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmN/A7306.30.50.28Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduitN/A7306.30.50.31With an outside diameter not exceeding 50.8 mmN/A7306.30.50.33With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmN/A7306.30.50.35Tube and pipe hollows for redrawingN/A7306.30.50.41With an outside diameter not exceeding 50.8 mmN/A7306.30.50.43With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmN/A7306.30.50.56With an outside diameter not exceeding 50.8 mmN/A7306.30.50.57With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mmN/A7306.30.50.85GalvanizedN/A7306.30.50.90OtherN/A7306.40Other, welded, of circular cross section, of stainless steel:N/A7306.40.10Having a wall thickness of less than 1.65 mmFree7306.40.10.10Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7306.40.10.15OtherN/A7306.40.10.90OtherN/A7306.40.50Having a wall thickness of 1.65 mm or moreFree7306.40.50.05Of high-nickel alloy steelN/A7306.40.50.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawnN/A7306.40.50.40Containing more than 0.5 percent but less than 24 percent by weight of nickelN/A7306.40.50.42Containing less than 15 percent by weight of chromiumN/A7306.40.50.44OtherN/A7306.40.50.62Containing more than 1.5 percent but less than 5 percent by weight of molybdenumN/A7306.40.50.64OtherN/A7306.40.50.80OtherN/A7306.40.50.85Containing more than 0.5 percent but less than 24 percent by weight of nickelN/A7306.40.50.90OtherN/A7306.50Other, welded, of circular cross section, of other alloy steel:N/A7306.50.10.00Having a wall thickness of less than 1.65 mmFree7306.50.30.00Tapered pipes and tubes of steel principally used as parts of illuminating articlesFree7306.50.50OtherFree7306.50.50.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawnN/A7306.50.50.30Other, cold-drawn or cold-rolled (cold- reduced)N/A7306.50.50.50With an outside diameter not exceeding 114.3 mmN/A7306.50.50.70With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmN/A7306.61Of square or rectangular cross section:N/A7306.61.10.00Of iron or nonalloy steelFree7306.61.30.00Of alloy steelFree7306.61.50.00Of iron or nonalloy steelFree7306.61.70Of alloy steelFree7306.61.70.30Of stainless steelN/A7306.61.70.60OtherN/A7306.69Of other noncircular cross section:N/A7306.69.10.00Of iron or nonalloy steelFree7306.69.30.00Of alloy steelFree7306.69.50.00Of iron or nonalloy steelFree7306.69.70Of alloy steelFree7306.69.70.30Of stainless steelN/A7306.69.70.60OtherN/A7306.90Other:N/A7306.90.10.00Of iron or nonalloy steelFree7306.90.50.00Of alloy steelFree7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:N/A7307.11.00Of nonmalleable cast iron4.8%7307.11.00.30For threaded pipeN/A7307.11.00.45For cast-iron soil pipeN/A7307.11.00.60OtherN/A7307.19Other:N/A7307.19.30Ductile fittings5.6%7307.19.30.40Grooved-end fittings (including grooved couplings)N/A7307.19.30.60ThreadedN/A7307.19.30.70With mechanical, push-on (rubber compression) or flanged joints attachedN/A7307.19.30.85OtherN/A7307.19.90Other6.2%7307.19.90.30UnionsN/A7307.19.90.40Grooved-end fittings (including grooved couplings)N/A7307.19.90.60ThreadedN/A7307.19.90.80OtherN/A7307.21Flanges:N/A7307.21.10.00Not machined, not tooled and not otherwise processed after forging3.3%7307.21.50.00Other5.6%7307.22Threaded elbows, bends and sleeves:N/A7307.22.10.00Sleeves (couplings)Free7307.22.50.00Other6.2%7307.23.00Butt welding fittings5%7307.23.00.30Not machined, not tooled and not otherwise processed after formingN/A7307.23.00.90OtherN/A7307.29.00Other5%7307.29.00.30NipplesN/A7307.29.00.90OtherN/A7307.91Flanges:N/A7307.91.10.00Of iron or nonalloy steel3.3%7307.91.30.00Of alloy steel (except stainless steel)3.2%7307.91.50Other5.5%7307.91.50.10Of iron or nonalloy steelN/A7307.91.50.30Of alloy steel (except stainless steel)N/A7307.91.50.50Of iron or nonalloy steelN/A7307.91.50.70Of alloy steel (except stainless steel)N/A7307.92Threaded elbows, bends and sleeves:N/A7307.92.30Sleeves (couplings)Free7307.92.30.10Of iron or nonalloy steelN/A7307.92.30.30Of alloy steel (except stainless steel)N/A7307.92.90.00Other6.2%7307.93Butt welding fittings:N/A7307.93.30Of iron or nonalloy steel6.2%7307.93.30.10Not machined, not tooled and not otherwise processed after forgingN/A7307.93.30.40OtherN/A7307.93.60.00Of alloy steel (except stainless steel)5.5%7307.93.90With an inside diameter of 360 mm or more4.3%7307.93.90.10Not machined, not tooled and not otherwise processed after forgingN/A7307.93.90.40OtherN/A7307.93.90.60Of alloy steel (except stainless steel)N/A7307.99Other:N/A7307.99.10.00Of iron or nonalloy steel3.7%7307.99.30.00Of alloy steel (except stainless steel)3.2%7307.99.50Other4.3%7307.99.50.15NipplesN/A7307.99.50.45OtherN/A7307.99.50.60Of alloy steel (except stainless steel)N/A7308Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:N/A7308.10.00.00Bridges and bridge sectionsFree7308.20.00Towers and lattice mastsFree7308.20.00.30Tubular, whether or not tapered, and sectional components thereofN/A7308.20.00.35Tubular wind turbine towers, whether or not tapered, and sectional components thereofN/A7308.20.00.90OtherN/A7308.30Doors, windows and their frames and thresholds for doors:N/A7308.30.10.00Of stainless steelFree7308.30.50OtherFree7308.30.50.15Windows and their framesN/A7308.30.50.25Thresholds for doorsN/A7308.30.50.50OtherN/A7308.40.00.00Equipment for scaffolding, shuttering, propping or pit- proppingFree7308.90Other:N/A7308.90.30.00Not in part of alloy steelFree7308.90.60.00OtherFree7308.90.70.00Steel gratingFree7308.90.95OtherFree7308.90.95.30Sheet-metal roofing, siding, flooring and roof drainage equipmentN/A7308.90.95.60Architectural and ornamental workN/A7308.90.95.90OtherN/A7309.00.00Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipmentFree7309.00.00.30TanksN/A7309.00.00.90OtherN/A7310Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:N/A7310.10.00Of a capacity of 50 liters or moreFree7310.10.00.05Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.N/A7310.10.00.15Empty steel drums and barrelsN/A7310.10.00.90OtherN/A7310.21.00Cans which are to be closed by soldering or crimpingFree7310.21.00.25Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goodsN/A7310.21.00.70Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosolsN/A7310.21.00.75OtherN/A7310.29.00OtherFree7310.29.00.20Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapterN/A7310.29.00.30OtherN/A7310.29.00.55Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapterN/A7310.29.00.65OtherN/A7311.00.00Containers for compressed or liquefied gas, of iron or steelFree7311.00.00.30Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption numberN/A7311.00.00.60OtherN/A7311.00.00.90OtherN/A7312Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:N/A7312.10Stranded wire, ropes and cables:N/A7312.10.05.00Fitted with fittings or made up into articlesFree7312.10.10OtherFree7312.10.10.30Tire cordN/A7312.10.10.50Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5N/A7312.10.10.70OtherN/A7312.10.20.00Fitted with fittings or made up into articlesFree7312.10.30OtherFree7312.10.30.05Tire cordN/A7312.10.30.10Covered with textile or other non- metallic materialN/A7312.10.30.12OtherN/A7312.10.30.20Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5N/A7312.10.30.45Of brass plated wireN/A7312.10.30.65ACSR core strandN/A7312.10.30.70Covered with textile or other nonmetallic materialN/A7312.10.30.74OtherN/A7312.10.30.80OtherN/A7312.10.50.00Fitted with fittings or made up into articlesFree7312.10.60OtherFree7312.10.60.30With a diameter not exceeding 9.5 mmN/A7312.10.60.60OtherN/A7312.10.70.00Fitted with fittings or made up into articlesFree7312.10.80.00Of brass plated wireFree7312.10.90OtherFree7312.10.90.30With a diameter not exceeding 9.5 mmN/A7312.10.90.60With a diameter exceeding 9.5 mmN/A7312.10.90.90OtherN/A7312.90.00.00OtherFree7313.00.00.00Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steelFree7314Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:N/A7314.12Endless bands for machinery, of stainless steel:N/A7314.12.10.00With meshes not finer than 12 wires to the lineal centimeter in warp or fillingFree7314.12.20.00With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or fillingFree7314.12.30.00With 94 or more wires to the lineal centimeterFree7314.12.60.00OtherFree7314.12.90.00OtherFree7314.14Other woven cloth, of stainless steel:N/A7314.14.10.00With meshes not finer than 12 wires to the lineal centimeter in warp or fillingFree7314.14.20.00With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or fillingFree7314.14.30.00With 94 or more wires to the lineal centimeterFree7314.14.60.00OtherFree7314.14.90.00OtherFree7314.19.01.00OtherFree7314.20.00.00Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or moreFree7314.31Plated or coated with zinc:N/A7314.31.10.00Wire fencing plated or coated with zinc, whether or not covered with plastic materialFree7314.31.50Other:Free7314.31.50.10Welded wire stucco netting, furred, not reinforced with supplemental horizontal wireN/A7314.31.50.80OtherN/A7314.39.00.00OtherFree7314.41.00Plated or coated with zincFree7314.41.00.30Chain link fencingN/A7314.41.00.40Of wire with maximum cross- sectional dimension of 1 mmN/A7314.41.00.45OtherN/A7314.41.00.80OtherN/A7314.42.00Coated with plasticsFree7314.42.00.30Chain link fencingN/A7314.42.00.60OtherN/A7314.49Other:N/A7314.49.30.00Not cut to shapeFree7314.49.60.00Cut to shapeFree7314.50.00.00Expanded metalFree7315Chain and parts thereof, of iron or steel:N/A7315.11.00Roller chainFree7315.11.00.05For motor vehiclesN/A7315.11.00.10Bicycle chainsN/A7315.11.00.45OtherN/A7315.11.00.60OtherN/A7315.12.00Other chainFree7315.12.00.20Of not over 50 mm pitch and containing more than 3 parts per pitchN/A7315.12.00.40Welded steel chainN/A7315.12.00.60Cast and combination chainN/A7315.12.00.80OtherN/A7315.19.00.00PartsFree7315.20Skid chain:N/A7315.20.10.00Not over 8 mm in diameterFree7315.20.50.00Over 8 mm in diameterFree7315.81.00.00Stud linkFree7315.82Other, welded link:N/A7315.82.10.00Not over 10 mm in diameterFree7315.82.30.00Over 10 mm in diameterFree7315.82.50.00Not over 10 mm in diameterFree7315.82.70.00Over 10 mm in diameterFree7315.89Other:N/A7315.89.10.00Not over 8 mm in diameter1.5%7315.89.30.00Over 8 mm in diameterFree7315.89.50.00Other3.9%7315.90.00.00Other parts2.9%7316.00.00.00Anchors, grapnels and parts thereof, of iron or steelFree7317.00Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:N/A7317.00.10.00Thumb tacksFree7317.00.20.00Not threadedFree7317.00.30.00ThreadedFree7317.00.55Made of round wireFree7317.00.55.01Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanizedN/A7317.00.55.02GalvanizedN/A7317.00.55.03OtherN/A7317.00.55.05GalvanizedN/A7317.00.55.07OtherN/A7317.00.55.08Assembled in a paper stripN/A7317.00.55.11Assembled in a wire stripN/A7317.00.55.18OtherN/A7317.00.55.19With a length of less than 25.4 mm and with a diameter of less than 1.65 mmN/A7317.00.55.20Not coated, plated or paintedN/A7317.00.55.30GalvanizedN/A7317.00.55.40Vinyl, resin or cement coatedN/A7317.00.55.50OtherN/A7317.00.55.60Not coated, plated or paintedN/A7317.00.55.70GalvanizedN/A7317.00.55.80Vinyl, resin or cement coatedN/A7317.00.55.90OtherN/A7317.00.65OtherFree7317.00.65.30CutN/A7317.00.65.60OtherN/A7317.00.75.00Of two or more piecesFree7318Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:N/A7318.11.00.00Coach screws12.5%7318.12.00.00Other wood screws12.5%7318.13.00Screw hooks and screw rings5.7%7318.13.00.30Having shanks or threads with a diameter of less than 6 mmN/A7318.13.00.60Having shanks or threads with a diameter of 6 mm or moreN/A7318.14Self-tapping screws:N/A7318.14.10Having shanks or threads with a diameter of less than 6 mm6.2%7318.14.10.30Of stainless steelN/A7318.14.10.60OtherN/A7318.14.50Having shanks or threads with a diameter of 6 mm or more8.6%7318.14.50.20Of stainless steelN/A7318.14.50.80OtherN/A7318.15Other screws and bolts, whether or not with their nuts or washers:N/A7318.15.20Bolts and bolts and their nuts or washers entered or exported in the same shipmentFree7318.15.20.10Having shanks or threads with a diameter of less than 6 mmN/A7318.15.20.20Track boltsN/A7318.15.20.30Structural boltsN/A7318.15.20.41Right-angle anchor boltsN/A7318.15.20.46OtherN/A7318.15.20.51Of stainless steelN/A7318.15.20.55OtherN/A7318.15.20.61Of stainless steelN/A7318.15.20.65OtherN/A7318.15.20.91Of stainless steelN/A7318.15.20.95OtherN/A7318.15.40.00Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)Free7318.15.50StudsFree7318.15.50.30Of stainless steelN/A7318.15.50.51Of alloy steelN/A7318.15.50.56OtherN/A7318.15.50.90OtherN/A7318.15.60Having shanks or threads with a diameter of less than 6 mm6.2%7318.15.60.10Of stainless steelN/A7318.15.60.40OtherN/A7318.15.60.70Of stainless steelN/A7318.15.60.80OtherN/A7318.15.80Having shanks or threads with a diameter of 6 mm or more8.5%7318.15.80.20Set screwsN/A7318.15.80.30Of stainless steelN/A7318.15.80.45OtherN/A7318.15.80.55Of stainless steelN/A7318.15.80.66Cap screwsN/A7318.15.80.69OtherN/A7318.15.80.82Of stainless steelN/A7318.15.80.85OtherN/A7318.16.00NutsFree7318.16.00.15Non-locking chrome-platedN/A7318.16.00.30LockingN/A7318.16.00.45OtherN/A7318.16.00.60Of stainless steelN/A7318.16.00.85OtherN/A7318.19.00.00Other5.7%7318.21.00Spring washers and other lock washers5.8%7318.21.00.30Helical spring lock washersN/A7318.21.00.90OtherN/A7318.22.00.00Other washersFree7318.23.00.00RivetsFree7318.24.00.00Cotters and cotter pins3.8%7318.29.00.00Other2.8%7319Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:N/A7319.40Safety pins and other pins:N/A7319.40.20Safety pins4.5%7319.40.20.10On cardsN/A7319.40.20.50OtherN/A7319.40.30.00Dressmakers' or common pins4.1%7319.40.50OtherFree7319.40.50.10Push pinsN/A7319.40.50.50OtherN/A7319.90Other:N/A7319.90.10.00Sewing, darning or embroidery needlesFree7319.90.90.00Other2.9%7320Springs and leaves for springs, of iron or steel:N/A7320.10Leaf springs and leaves therefor:N/A7320.10.30.00To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons3.2%7320.10.60Other3.2%7320.10.60.15Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves thereforN/A7320.10.60.60OtherN/A7320.10.90Other3.2%7320.10.90.15Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves thereforN/A7320.10.90.60OtherN/A7320.20Helical springs:N/A7320.20.10.00Suitable for motor-vehicle suspension3.2%7320.20.50Other3.9%7320.20.50.10Suitable for use in mattress supports and mattresses of heading 9404N/A7320.20.50.20OtherN/A7320.20.50.45Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mmN/A7320.20.50.60OtherN/A7320.90Other:N/A7320.90.10.00HairspringsFree7320.90.50Other2.9%7320.90.50.10Suitable for use in mattress supports and mattresses of heading 9404N/A7320.90.50.20OtherN/A7320.90.50.60OtherN/A7321Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:N/A7321.11For gas fuel or for both gas and other fuels:N/A7321.11.10Portable5.7%7321.11.10.30Stoves or rangesN/A7321.11.10.60OtherN/A7321.11.30Stoves or ranges:Free7321.11.30.10Of a maximum width not exceeding 70 centimetersN/A7321.11.30.20Of a maximum width exceeding 70 but not exceeding 80 centimetersN/A7321.11.30.50Of a maximum width exceeding 80 centimetersN/A7321.11.60.00OtherFree7321.12.00.00For liquid fuelFree7321.19.00Other, including appliances for solid fuelFree7321.19.00.20HibachisN/A7321.19.00.40OtherN/A7321.19.00.60Of cast ironN/A7321.19.00.80OtherN/A7321.81For gas fuel or for both gas and other fuels:N/A7321.81.10.00Portable2.9%7321.81.50.00OtherFree7321.82For liquid fuel:N/A7321.82.10.00Portable2.9%7321.82.50.00OtherFree7321.89.00Other, including appliances for solid fuelFree7321.89.00.10Fireplace grates of cast ironN/A7321.89.00.50OtherN/A7321.90Parts:N/A7321.90.10.00Cooking chambers, whether or not assembledFree7321.90.20.00Top surface panels with or without burners or controlsFree7321.90.40.00Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulationFree7321.90.50.00OtherFree7321.90.60OtherFree7321.90.60.40Shelving and racks for cooking ovensN/A7321.90.60.60OtherN/A7321.90.60.90OtherN/A7322Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:N/A7322.11.00.00Of cast ironFree7322.19.00.00OtherFree7322.90.00Other, including partsFree7322.90.00.15Air heaters, not electrically heated, incorporating a motor-driven fan or blowerN/A7322.90.00.30Hot air distributors, not electrically heated, incorporating a motor-driven fan or blowerN/A7322.90.00.45Parts of air heaters and hot air distributorsN/A7323Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:N/A7323.10.00.00Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the likeFree7323.91Of cast iron, not enameled:N/A7323.91.10.00Coated or plated with precious metalFree7323.91.50Other5.3%7323.91.50.20Bakeware (cookware not suitable for stove top use)N/A7323.91.50.40OtherN/A7323.92.00Of cast iron, enameledFree7323.92.00.20Bakeware (cookware not suitable for stove top use)N/A7323.92.00.40OtherN/A7323.93.00Of stainless steel2%7323.93.00.15TeakettlesN/A7323.93.00.35Bakeware (cookware not suitable for stove top use)N/A7323.93.00.45OtherN/A7323.93.00.60Kitchen wareN/A7323.93.00.80OtherN/A7323.94.00Of iron (other than cast iron) or steel, enameled2.7%7323.94.00.10TeakettlesN/A7323.94.00.21Bakeware (cookware not suitable for stove top use)N/A7323.94.00.26OtherN/A7323.94.00.30Kitchen wareN/A7323.94.00.40OtherN/A7323.94.00.80OtherN/A7323.99Other:N/A7323.99.10.00Coated or plated with silverFree7323.99.30.00Other8.2%7323.99.50Of tinplateFree7323.99.50.30Kitchen or tableware suitable for food or drink contactN/A7323.99.50.60OtherN/A7323.99.70.00Cookingware5.3%7323.99.90Other3.4%7323.99.90.30Kitchen or tableware suitable for food or drink contactN/A7323.99.90.40Gates for confining children or petsN/A7323.99.90.80OtherN/A7324Sanitary ware and parts thereof, of iron or steel:N/A7324.10.00Sinks and wash basins, of stainless steel3.4%7324.10.00.10Stainless steel sinks with one or more drawn bowls (basins)N/A7324.10.00.50OtherN/A7324.21Of cast iron, whether or not enamelled:N/A7324.21.10.00Coated or plated with precious metalFree7324.21.50.00OtherFree7324.29.00.00OtherFree7324.90.00.00Other, including partsFree7325Other cast articles of iron or steel:N/A7325.10.00Of nonmalleable cast ironFree7325.10.00.10Manhole covers, rings and framesN/A7325.10.00.20Catch basins, grates and framesN/A7325.10.00.25Cleanout covers and framesN/A7325.10.00.30Valve and service boxesN/A7325.10.00.35Meter boxesN/A7325.10.00.80OtherN/A7325.91.00.00Grinding balls and similar articles for mills2.9%7325.99Other:N/A7325.99.10.00Of cast ironFree7325.99.50.00Other2.9%7326Other articles of iron or steel:N/A7326.11.00.00Grinding balls and similar articles for millsFree7326.19.00Other2.9%7326.19.00.10ForgedN/A7326.19.00.80OtherN/A7326.20.00Articles of iron or steel wire3.9%7326.20.00.10Belts and beltingN/A7326.20.00.20Garment hangersN/A7326.20.00.30Sod staples, U staples, irrigation staples, ground staples, and ground pinsN/A7326.20.00.40Double loop bar ties and double loop wire tiesN/A7326.20.00.55Paint roller framesN/A7326.20.00.90OtherN/A7326.90Other:N/A7326.90.10.00Of tinplateFree7326.90.25.00Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to lengthFree7326.90.35.00Containers of a kind normally carried on the person, in the pocket or in the handbag7.8%7326.90.45.00Horse and mule shoesFree7326.90.60.00Coated or plated with precious metal8.6%7326.90.86Other2.9%7326.90.86.05Rods for electrical groundingN/A7326.90.86.10Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic materialN/A7326.90.86.30Hangers and similar supports for tubes and pipesN/A7326.90.86.35Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor platesN/A7326.90.86.45Barbed tapeN/A7326.90.86.60LaddersN/A7326.90.86.75Paint roller frames (other than of iron or steel wire)N/A7326.90.86.76Metal handles for brooms, mops, paint applicators and similar productsN/A7326.90.86.77Burial casketsN/A7326.90.86.88OtherN/A7401.00.00.00Copper mattes; cement copper (precipitated copper)Free7402.00.00.00Unrefined copper; copper anodes for electrolytic refiningFree7403Refined copper and copper alloys, unwrought (other than master alloys of heading 7405):N/A7403.11.00.00Cathodes and sections of cathodes1%7403.12.00.00Wire bars1%7403.13.00.00Billets1%7403.19.00.00Other1%7403.21.00.00Copper-zinc base alloys (brass)1%7403.22.00.00Copper-tin base alloys (bronze)1%7403.29.01Other copper alloys1%7403.29.01.10Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)N/A7403.29.01.80OtherN/A7404.00Copper waste and scrap:N/A7404.00.30Spent anodes; waste and scrap with a copper content of less than 94 percent by weightFree7404.00.30.20Of refined copperN/A7404.00.30.45Containing more than 0.3 percent of leadN/A7404.00.30.55OtherN/A7404.00.30.65Of copper-tin base alloys (bronze)N/A7404.00.30.90OtherN/A7404.00.60OtherFree7404.00.60.20Of refined copperN/A7404.00.60.45Containing more than 0.3 percent of leadN/A7404.00.60.55OtherN/A7404.00.60.65Of copper-tin base alloys (bronze)N/A7404.00.60.90OtherN/A7405.00Master alloys of copper:N/A7405.00.10.00Containing by weight 5 percent or more but not more than 15 percent of phosphorusFree7405.00.60OtherFree7405.00.60.30Beryllium copper master alloyN/A7405.00.60.50OtherN/A7406Copper powders and flakes:N/A7406.10.00.00Powders of non-lamellar structureFree7406.20.00.00Powders of lamellar structure; flakesFree7407Copper bars, rods and profiles:N/A7407.10Of refined copper:N/A7407.10.15.00Hollow profiles3%7407.10.30.00Other3%7407.10.50Bars and rods1%7407.10.50.10Having a rectangular cross sectionN/A7407.10.50.50OtherN/A7407.21Of copper-zinc base alloys (brass):N/A7407.21.15.00Hollow profiles2.2%7407.21.30.00Other2.2%7407.21.50.00Low fuming brazing rods2.2%7407.21.70.00Having a rectangular cross section1.9%7407.21.90.00Other2.2%7407.29Other:N/A7407.29.16Hollow3%7407.29.16.10Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)N/A7407.29.16.80OtherN/A7407.29.34.00Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)3%7407.29.38.00Other3%7407.29.40.00Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)3%7407.29.50.00Other bars and rods1.6%7408Copper wire:N/A7408.11Of which the maximum cross-sectional dimension exceeds 6 mm:N/A7408.11.30.00With a maximum cross-sectional dimension over 9.5 mm1%7408.11.60.00With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm3%7408.19.00Other3%7408.19.00.30With a maximum cross-sectional dimension of 3 mm or lessN/A7408.19.00.60OtherN/A7408.21.00.00Of copper-zinc base alloys (brass)3%7408.22Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver):N/A7408.22.10.00Coated or plated with metal3%7408.22.50.00Not coated or plated with metal3%7408.29Other:N/A7408.29.10.00Coated or plated with metal3%7408.29.50.00Not coated or plated with metal3%7409Copper plates, sheets and strip, of a thickness exceeding 0.15 mm:N/A7409.11In coils:N/A7409.11.10.00Of a thickness of 5 mm or more3%7409.11.50Of a thickness of less than 5 mm1%7409.11.50.10Of a width of 500 mm or moreN/A7409.11.50.50Of a width of less than 500 mmN/A7409.19Other:N/A7409.19.10.00Of a thickness of 5 mm or more3%7409.19.50.00Of a width of 500 mm or more1%7409.19.90.00Of a width of less than 500 mm3%7409.21.00In coils1.9%7409.21.00.10Of a thickness of 5 mm or moreN/A7409.21.00.50Of a width of 500 mm or moreN/A7409.21.00.75Of a thickness less than 1.6 mmN/A7409.21.00.90OtherN/A7409.29.00Other1.9%7409.29.00.10Of a thickness of 5 mm or moreN/A7409.29.00.50Of a width of 500 mm or moreN/A7409.29.00.75Of a thickness less than 1.6 mmN/A7409.29.00.90OtherN/A7409.31In coils:N/A7409.31.10.00Of a thickness of 5 mm or more3%7409.31.50.00Of a width of 500 mm or more1.7%7409.31.90.00Of a width of less than 500 mm3%7409.39Other:N/A7409.39.10Of a thickness of 5 mm or more3%7409.39.10.30Of phosphor bronzeN/A7409.39.10.60OtherN/A7409.39.50.00Of a width of 500 mm or more1.7%7409.39.90Of a width of less than 500 mm3%7409.39.90.30Of phosphor bronzeN/A7409.39.90.60OtherN/A7409.40.00.00Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver)3%7409.90Of other copper alloys:N/A7409.90.10Of a thickness of 5 mm or more3%7409.90.10.30Of beryllium copperN/A7409.90.10.60OtherN/A7409.90.50Of a width of 500 mm or more1.7%7409.90.50.30Of beryllium copperN/A7409.90.50.60OtherN/A7409.90.90Of a width of less than 500 mm3%7409.90.90.30Of beryllium copperN/A7409.90.90.60OtherN/A7410Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm:N/A7410.11.00.00Of refined copper1%7410.12.00Of copper alloys1%7410.12.00.30Of copper-zinc base alloys (brass)N/A7410.12.00.60OtherN/A7410.21Of refined copper:N/A7410.21.30Copper clad laminates3%7410.21.30.20Having copper on one side onlyN/A7410.21.30.40Having copper on both sidesN/A7410.21.30.60OtherN/A7410.21.60.00Other1.5%7410.22.00.00Of copper alloys1.5%7411Copper tubes and pipes:N/A7411.10Of refined copper:N/A7411.10.10Seamless1.5%7411.10.10.30Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spoolsN/A7411.10.10.90OtherN/A7411.10.50.00Other3%7411.21Of copper-zinc base alloys (brass):N/A7411.21.10.00Seamless1.4%7411.21.50.00Other3%7411.22.00.00Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver)3%7411.29Other:N/A7411.29.10.00Seamless1.4%7411.29.50.00Other3%7412Copper tube or pipe fittings (for example couplings, elbows, sleeves):N/A7412.10.00.00Of refined copper3%7412.20.00Of copper alloys3%7412.20.00.15For brake hoses for vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, or 8705N/A7412.20.00.25NipplesN/A7412.20.00.35OtherN/A7412.20.00.45OtherN/A7412.20.00.65NipplesN/A7412.20.00.85OtherN/A7412.20.00.90OtherN/A7413.00Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated:N/A7413.00.10.00Stranded wire3%7413.00.50.00Other2%7413.00.90.00Fitted with fittings or made up into articles3%7415Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper:N/A7415.10.00.00Nails and tacks, drawing pins, staples and similar articles2.5%7415.21.00.00Washers (including spring washers)3%7415.29.00.00Other3%7415.33Screws, bolts and nuts:N/A7415.33.05.00Screws for wood3%7415.33.10.00Muntz or yellow metal bolts1.4%7415.33.80Other screws and bolts; nuts3%7415.33.80.10Having shanks, threads or holes 6 mm or more in diameterN/A7415.33.80.50Having shanks, threads or holes less than 6 mm in diameterN/A7415.39.00.00Other3%7418Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper:N/A7418.10.00Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like3%7418.10.00.02Of copper-zinc base alloys (brass)N/A7418.10.00.04OtherN/A7418.10.00.19Coated or plated with precious metalsN/A7418.10.00.21Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereofN/A7418.10.00.23Cooking and kitchen wareN/A7418.10.00.25OtherN/A7418.10.00.51Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereofN/A7418.10.00.53Cooking and kitchen wareN/A7418.10.00.55OtherN/A7418.20Sanitary ware and parts thereof:N/A7418.20.10.00Of copper-zinc base alloys (brass)3%7418.20.50.00Other3%7419Other articles of copper:N/A7419.20.00Cast, molded, stamped or forged, but not further workedFree7419.20.00.10Brass plumbing goods, not elsewhere specified or includedN/A7419.20.00.50OtherN/A7419.80Other:N/A7419.80.03.00Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeterFree7419.80.06Other3%7419.80.06.60Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with fewer than 94 or more wires to the lineal centimeterN/A7419.80.06.80OtherN/A7419.80.09.00Other3%7419.80.15.00Containers of a kind normally carried on the person, in the pocket or in the handbag3%7419.80.16.00Copper springs3%7419.80.17.00Chain and parts thereof3%7419.80.30.00Coated or plated with precious metal3%7419.80.50OtherFree7419.80.50.10Brass plumbing goods not elsewhere specified or includedN/A7419.80.50.50OtherN/A7501Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy:N/A7501.10.00.00Nickel mattesFree7501.20.00.00Nickel oxide sinters and other intermediate products of nickel metallurgyFree7502Unwrought nickel:N/A7502.10.00.00Nickel, not alloyedFree7502.20.00.00Nickel alloysFree7503.00.00.00Nickel waste and scrapFree7504.00.00Nickel powders and flakesFree7504.00.00.10PowdersN/A7504.00.00.50FlakesN/A7505Nickel bars, rods, profiles and wire:N/A7505.11Of nickel, not alloyed:N/A7505.11.10.00Cold-formed3%7505.11.30.00Not cold-formed2.6%7505.11.50.00Profiles3%7505.12Of nickel alloys:N/A7505.12.10.00Cold-formed3%7505.12.30.00Not cold-formed2.5%7505.12.50.00Profiles3%7505.21Of nickel, not alloyed:N/A7505.21.10.00Cold-formed3%7505.21.50.00Not cold-formed2.6%7505.22Of nickel alloys:N/A7505.22.10.00Cold-formed3%7505.22.50.00Not cold-formed2.6%7506Nickel plates, sheets, strip and foil:N/A7506.10Of nickel, not alloyed:N/A7506.10.05.00Not exceeding 0.15 mm in thickness2.5%7506.10.10.00Cold-formed3%7506.10.30.00Not cold-formed2.5%7506.20Of nickel alloys:N/A7506.20.05.00Not exceeding 0.15 mm in thickness3%7506.20.10.00Cold-formed3%7506.20.30.00Not cold-formed2.5%7507Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves):N/A7507.11.00.00Of nickel, not alloyed2%7507.12.00.00Of nickel alloys2%7507.20.00.00Tube or pipe fittings3%7508Other articles of nickel:N/A7508.10.00.00Cloth, grill and netting, of nickel wire3%7508.90Other:N/A7508.90.10.00Stranded wire3%7508.90.50.00Other3%7601Unwrought aluminum:N/A7601.10Aluminum, not alloyed:N/A7601.10.30.00Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils2.6%7601.10.60OtherFree7601.10.60.40Of 99.9 percent aluminum or greaterN/A7601.10.60.45Of greater than 99.8 percent but less than 99.9 percentN/A7601.10.60.90OtherN/A7601.20Aluminum alloys:N/A7601.20.30.00Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils2.6%7601.20.60.00Containing 25 percent or more by weight of silicon2.1%7601.20.90OtherFree7601.20.90.30Aluminum vanadium master alloyN/A7601.20.90.45Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coilsN/A7601.20.90.60Other, containing 0.03 percent or more by weight of lead (secondary aluminum)N/A7601.20.90.75Remelt scrap ingotN/A7601.20.90.80Sheet ingot (slab) of a kind described in statistical note 3 to this chapterN/A7601.20.90.85Foundry ingot of a kind described in statistical note 4 to this chapterN/A7601.20.90.95OtherN/A7602.00.00Aluminum waste and scrapFree7602.00.00.35Recyclable used beverage containersN/A7602.00.00.45Recyclable aluminum auto and truck wheelsN/A7602.00.00.55Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chipsN/A7602.00.00.65Other recyclable aluminumN/A7602.00.00.75OtherN/A7603Aluminum powders and flakes:N/A7603.10.00.00Powders of non-lamellar structure5%7603.20.00.00Powders of lamellar structure; flakes3.9%7604Aluminum bars, rods and profiles:N/A7604.10Of aluminum, not alloyed:N/A7604.10.10.00Profiles5%7604.10.30.00Having a round cross section2.6%7604.10.50.00Other3%7604.21.00Hollow profiles1.5%7604.21.00.10Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapterN/A7604.21.00.90OtherN/A7604.29Other:N/A7604.29.10Other profiles5%7604.29.10.10Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapterN/A7604.29.10.90OtherN/A7604.29.30Having a round cross section2.6%7604.29.30.30High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapterN/A7604.29.30.60Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapterN/A7604.29.30.90OtherN/A7604.29.50Other3%7604.29.50.20High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapterN/A7604.29.50.50Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapterN/A7604.29.50.90OtherN/A7605Aluminum wire:N/A7605.11.00.00Of which the maximum cross-sectional dimension exceeds 7 mm2.6%7605.19.00.00Other4.2%7605.21.00.00Of which the maximum cross-sectional dimension exceeds 7 mm2.6%7605.29.00.00Other4.2%7606Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm:N/A7606.11Of aluminum, not alloyed:N/A7606.11.30Not clad3%7606.11.30.30With a thickness of more than 6.3 mmN/A7606.11.30.60With a thickness of 6.3 mm or lessN/A7606.11.60.00Clad2.7%7606.12Of aluminum alloys:N/A7606.12.30Not clad3%7606.12.30.15High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapterN/A7606.12.30.25Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapterN/A7606.12.30.35OtherN/A7606.12.30.45Body stockN/A7606.12.30.55Lid stockN/A7606.12.30.91Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapterN/A7606.12.30.96OtherN/A7606.12.60.00Clad6.5%7606.91Of aluminum, not alloyed:N/A7606.91.30Not clad3%7606.91.30.55With a thickness of more than 6.3 mmN/A7606.91.30.95With a thickness of 6.3 mm or lessN/A7606.91.60Clad2.7%7606.91.60.55With a thickness of more than 6.3 mmN/A7606.91.60.95With a thickness of 6.3 mm or lessN/A7606.92Of aluminum alloys:N/A7606.92.30Not clad3%7606.92.30.25With a thickness of more than 6.3 mmN/A7606.92.30.35With a thickness of 6.3 mm or lessN/A7606.92.60Clad6.5%7606.92.60.55With a thickness of more than 6.3 mmN/A7606.92.60.95With a thickness of 6.3 mm or lessN/A7607Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:N/A7607.11Rolled but not further worked:N/A7607.11.30.00Of a thickness not exceeding 0.01 mm5.8%7607.11.60Of a thickness exceeding 0.01 mm5.3%7607.11.60.10Boxed aluminum foil weighing not more than 11.3 kgN/A7607.11.60.90OtherN/A7607.11.90Other3%7607.11.90.30Body stockN/A7607.11.90.60Lid stockN/A7607.11.90.90OtherN/A7607.19Other:N/A7607.19.10.00Etched capacitor foil5.3%7607.19.30.00Cut to shape, of a thickness not exceeding 0.15 mm5.7%7607.19.60.00Other3%7607.20Backed:N/A7607.20.10.00Covered or decorated with a character, design, fancy effect or pattern3.7%7607.20.50.00OtherFree7608Aluminum tubes and pipes:N/A7608.10.00Of aluminum, not alloyed5.7%7608.10.00.30SeamlessN/A7608.10.00.90OtherN/A7608.20.00Of aluminum alloys5.7%7608.20.00.30SeamlessN/A7608.20.00.90OtherN/A7609.00.00.00Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)5.7%7610Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:N/A7610.10.00Doors, windows and their frames and thresholds for doors5.7%7610.10.00.10Windows and their framesN/A7610.10.00.20Thresholds for doorsN/A7610.10.00.30OtherN/A7610.90.00Other5.7%7610.90.00.20Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipmentN/A7610.90.00.40Architectural and ornamental workN/A7610.90.00.60Mobile homesN/A7610.90.00.80OtherN/A7611.00.00Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment2.6%7611.00.00.30TanksN/A7611.00.00.90OtherN/A7612Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:N/A7612.10.00.00Collapsible tubular containers2.4%7612.90Other:N/A7612.90.10Of a capacity not exceeding 20 liters5.7%7612.90.10.40With a circular cross section, of a kind used for aerosolsN/A7612.90.10.45OtherN/A7612.90.10.60Cans of a capacity exceeding 355 ml but less than 3.8 litersN/A7612.90.10.90OtherN/A7612.90.50.00OtherFree7613.00.00.00Aluminum containers for compressed or liquefied gas5%7614Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:N/A7614.10With steel core:N/A7614.10.10.00Not fitted with fittings and not made up into articles4.9%7614.10.50.00Fitted with fittings or made up into articles4.9%7614.90Other:N/A7614.90.20Electrical conductors4.9%7614.90.20.30With a cross-sectional area less than 240 mm²N/A7614.90.20.60With a cross-sectional area greater than or equal to 240 mm²N/A7614.90.40.00Other4.9%7614.90.50.00Fitted with fittings or made up into articles5.7%7615Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:N/A7615.10Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:N/A7615.10.11.00Pot scourers and scouring or polishing pads, gloves and the like3.1%7615.10.20Cast3.1%7615.10.20.15Bakeware (cookware not suitable for stove top use)N/A7615.10.20.25OtherN/A7615.10.30Other3.1%7615.10.30.15Bakeware (cookware not suitable for stove top use)N/A7615.10.30.25OtherN/A7615.10.50Cast3.1%7615.10.50.20Bakeware (cookware not suitable for stove top use)N/A7615.10.50.40OtherN/A7615.10.71Other3.1%7615.10.71.25Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thicknessN/A7615.10.71.30Bakeware (cookware not suitable for stove top use)N/A7615.10.71.55OtherN/A7615.10.71.80OtherN/A7615.10.91.00Other3.1%7615.20.00.00Sanitary ware and parts thereof3.8%7616Other articles of aluminum:N/A7616.10Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles:N/A7616.10.10.00Nails, tacks and staples5.7%7616.10.30.00Rivets4.7%7616.10.50.00Cotters and cotter pins5.7%7616.10.70Having shanks, threads or holes over 6 mm in diameter5.5%7616.10.70.30Threaded fastenersN/A7616.10.70.90OtherN/A7616.10.90Other6%7616.10.90.30Threaded fastenersN/A7616.10.90.90OtherN/A7616.91.00.00Cloth, grill, netting and fencing, of aluminum wire2.5%7616.99Other:N/A7616.99.10.00Luggage framesFree7616.99.51Other2.5%7616.99.51.20Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic materialN/A7616.99.51.30LaddersN/A7616.99.51.40Venetian blinds and parts thereofN/A7616.99.51.50Hangers and supports for pipes and tubesN/A7616.99.51.60CastingsN/A7616.99.51.70ForgingsN/A7616.99.51.75Articles of wireN/A7616.99.51.90OtherN/A7801Unwrought lead:N/A7801.10.00.00Refined lead2.5% on the value of the lead content7801.91.00.00Containing by weight antimony as the principal other element2.5% on the value of the lead content7801.99Other:N/A7801.99.30.00Lead bullion2.5% on the value of the lead content7801.99.90Other2.5% on the value of the lead content7801.99.90.30Alloys of leadN/A7801.99.90.50OtherN/A7802.00.00Lead waste and scrapFree7802.00.00.30Obtained from lead-acid storage batteriesN/A7802.00.00.60OtherN/A7804Lead plates, sheets, strip and foil; lead powders and flakes:N/A7804.11.00.00Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm2.2%7804.19.00.00Other3%7804.20.00.00Powders and flakesFree7806Other articles of lead:N/A7806.00.03.00Lead bars, rods, profiles and wire1.2%7806.00.05.00Lead tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)2%7806.00.80.00Other3%7901Unwrought zinc:N/A7901.11.00.00Containing by weight 99.99 percent or more of zinc1.5%7901.12Containing by weight less than 99.99 percent of zinc:N/A7901.12.10.00Casting-grade zinc3%7901.12.50.00Other1.5%7901.20.00.00Zinc alloys3%7902.00.00.00Zinc waste and scrapFree7903Zinc dust, powders and flakes:N/A7903.10.00.00Zinc dust0.7¢/kg7903.90Other:N/A7903.90.30.00Powders0.5¢/kg7903.90.60.00Other3%7904.00.00.00Zinc bars, rods, profiles and wire4.2%7905.00.00.00Zinc plates, sheets, strip and foil2.8%7907.00Other articles of zinc:N/A7907.00.10.00Articles of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing and parts thereof of zinc3%7907.00.20.00Zinc tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)3%7907.00.60.00Other3%8001Unwrought tin:N/A8001.10.00.00Tin, not alloyedFree8001.20.00Tin alloysFree8001.20.00.10Containing, by weight, 5 percent or less of leadN/A8001.20.00.50Containing, by weight, more than 5 percent but not more than 25 percent of leadN/A8001.20.00.90Containing, by weight, more than 25 percent of leadN/A8002.00.00.00Tin waste and scrapFree8003.00.00.00Tin bars, rods, profiles and wire3%8007.00Other articles of tin:N/A8007.00.10Articles not elsewhere specified or included of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing not coated or plated with precious metal2.1%8007.00.10.10Suitable for food or beverage serviceN/A8007.00.10.50OtherN/A8007.00.20.00Tin plates, sheets and strip, of a thickness exceeding 0.2 mm2.4%8007.00.31.00Tin foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm3%8007.00.32.00Powders and flakes2.8%8007.00.40.00Tin tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)2.4%8007.00.50.00Other2.8%8101Tungsten (wolfram) and articles thereof, including waste and scrap:N/A8101.10.00.00Powders7%8101.94.00.00Unwrought tungsten, including bars and rods obtained simply by sintering6.6%8101.96.00.00Wire4.4%8101.97.00.00Waste and scrap2.8%8101.99Other:N/A8101.99.10.00Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil6.5%8101.99.80.00Other3.7%8102Molybdenum and articles thereof, including waste and scrap:N/A8102.10.00.00Powders9.1¢/kg on molybdenum content + 1.2%8102.94.00.00Unwrought molybdenum, including bars and rods obtained simply by sintering13.9¢/kg on molybdenum content + 1.9%8102.95Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil:N/A8102.95.30.00Bars and rods6.6%8102.95.60.00Other6.6%8102.96.00.00Wire4.4%8102.97.00.00Waste and scrapFree8102.99.00.00Other3.7%8103Tantalum and articles thereof, including waste and scrap:N/A8103.20.00Unwrought tantalum, including bars and rods obtained simply by sintering; powders2.5%8103.20.00.30PowdersN/A8103.20.00.90OtherN/A8103.30.00.00Waste and scrapFree8103.91.00.00Crucibles4.4%8103.99.00.00Other4.4%8104Magnesium and articles thereof, including waste and scrap:N/A8104.11.00.00Containing at least 99.8 percent by weight of magnesium8%8104.19.00.00Other6.5%8104.20.00.00Waste and scrapFree8104.30.00.00Raspings, turnings and granules, graded according to size; powders4.4%8104.90.00.00Other14.8¢/kg on magnesium content + 3.5%8105Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap:N/A8105.20Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders:N/A8105.20.30.00Alloys4.4%8105.20.60.00OtherFree8105.20.90.00OtherFree8105.30.00.00Waste and scrapFree8105.90.00.00Other3.7%8106Bismuth and articles thereof, including waste and scrap:N/A8106.10.00.00Containing more than 99.99 percent of bismuth, by weightFree8106.90.00.00OtherFree8108Titanium and articles thereof, including waste and scrap:N/A8108.20.00Unwrought titanium; powders15%8108.20.00.10SpongeN/A8108.20.00.15PowdersN/A8108.20.00.30IngotsN/A8108.20.00.95OtherN/A8108.30.00.00Waste and scrapFree8108.90Other:N/A8108.90.30Articles of titanium5.5%8108.90.30.30CastingsN/A8108.90.30.60OtherN/A8108.90.60Other15%8108.90.60.20Blooms, sheet bars, and slabsN/A8108.90.60.31Other bars, rods, profiles and wireN/A8108.90.60.45Plates, sheets, strips and foilN/A8108.90.60.60Tubes and pipesN/A8108.90.60.75OtherN/A8109Zirconium and articles thereof, including waste and scrap:N/A8109.21.00.00Containing less than 1 part hafnium to 500 parts zirconium by weight4.2%8109.29.00.00Other4.2%8109.31.00.00Containing less than 1 part hafnium to 500 parts zirconium by weightFree8109.39.00.00OtherFree8109.91.00.00Containing less than 1 part hafnium to 500 parts zirconium by weight3.7%8109.99.00.00Other3.7%8110Antimony and articles thereof, including waste and scrap:N/A8110.10.00.00Unwrought antimony; powdersFree8110.20.00.00Waste and scrapFree8110.90.00.00OtherFree8111.00Manganese and articles thereof, including waste and scrap:N/A8111.00.30.00Waste and scrapFree8111.00.47.00Flake containing at least 99.5 percent by weight manganese14%8111.00.49Other14%8111.00.49.10Powder containing at least 99.5 percent by weight manganeseN/A8111.00.49.90OtherN/A8111.00.60.00Other3.7%8112Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap:N/A8112.12.00.00Unwrought; powders8.5%8112.13.00.00Waste and scrapFree8112.19.00.00Other5.5%8112.21.00.00Unwrought; powders3%8112.22.00.00Waste and scrapFree8112.29.00.00Other3%8112.31.00.00Unwrought; waste and scrap; powdersFree8112.39.00.00Other4%8112.41Unwrought; waste and scrap; powders:N/A8112.41.10.00Waste and scrapFree8112.41.50.00Unwrought; powders3%8112.49.00.00Other4%8112.51.00.00Unwrought; powders4%8112.52.00.00Waste and scrapFree8112.59.00.00Other4%8112.61.00.00Waste and scrapFree8112.69Other:N/A8112.69.10.00Unwrought cadmium; powdersFree8112.69.90.00Other4.4%8112.92Unwrought; waste and scrap; powders:N/A8112.92.07.00Waste and scrapFree8112.92.10.00Gallium3%8112.92.30.00IndiumFree8112.92.40.00Niobium (columbium)4.9%8112.92.60.00Unwrought2.6%8112.92.65.00Other4.4%8112.92.70.00Vanadium2%8112.99Other:N/A8112.99.10.00Germanium4.4%8112.99.20.00Vanadium2%8112.99.91.00Other4%8113.00.00.00Cermets and articles thereof, including waste and scrap3.7%8201Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:N/A8201.10.00.00Spades and shovels, and parts thereofFree8201.30.00Mattocks, picks, hoes and rakes, and parts thereofFree8201.30.00.10Mattocks and picks, and parts thereofN/A8201.30.00.80OtherN/A8201.40Axes, bill hooks and similar hewing tools, and parts thereof:N/A8201.40.30.00Machetes, and parts thereofFree8201.40.60Other6.2%8201.40.60.10Axes and adzes, and parts thereofN/A8201.40.60.80OtherN/A8201.50.00.00Secateurs and similar one-handed pruners and shears (including poultry shears), and parts thereof1¢ each + 2.8%8201.60.00.00Hedge shears, two-handed pruning shears and similar two-handed shears, and parts thereof1¢ each + 2.8%8201.90Other handtools of a kind used in agriculture, horticulture or forestry, and parts thereof:N/A8201.90.30.00Grass shears, and parts thereof2¢ each + 5.1%8201.90.40.00Forks, and parts thereofFree8201.90.60.00OtherFree8202Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:N/A8202.10.00.00Handsaws, and parts (except blades) thereofFree8202.20.00Bandsaw blades, and parts thereofFree8202.20.00.30Metal cutting bladesN/A8202.20.00.60OtherN/A8202.31.00.00With working part of steelFree8202.39.00Other, including partsFree8202.39.00.10With diamond working partsN/A8202.39.00.40Diamond sawblade coresN/A8202.39.00.70OtherN/A8202.40Chain saw blades, and parts thereof:N/A8202.40.30.00With cutting parts containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium7.2%8202.40.60OtherFree8202.40.60.30In continuous lengthsN/A8202.40.60.60OtherN/A8202.91Straight saw blades, for working metal:N/A8202.91.30.00Hacksaw bladesFree8202.91.60.00OtherFree8202.99.00.00Other (including parts)Free8203Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:N/A8203.10Files, rasps and similar tools:N/A8203.10.30.00Not over 11 cm in lengthFree8203.10.60.00Over 11 cm but not over 17 cm in lengthFree8203.10.90.00Over 17 cm in lengthFree8203.20Pliers (including cutting pliers), pincers, tweezers and similar tools, and parts thereof:N/A8203.20.20.00Tweezers4%8203.20.40.00Slip joint pliers12%8203.20.60Other (except parts)12¢/doz. + 5.5%8203.20.60.30PliersN/A8203.20.60.60OtherN/A8203.20.80.00Parts4.5%8203.30.00.00Metal cutting shears and similar tools, and parts thereofFree8203.40Pipe cutters, bolt cutters, perforating punches and similar tools, and parts thereof:N/A8203.40.30.00With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium6%8203.40.60.00Other (including parts)3.3%8204Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:N/A8204.11.00Nonadjustable, and parts thereof9%8204.11.00.30Open-end, box and combination open-end and box wrenchesN/A8204.11.00.60Other (including parts)N/A8204.12.00.00Adjustable, and parts thereof9%8204.20.00.00Socket wrenches, with or without handles, drives and extensions, and parts thereof9%8205Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:N/A8205.10.00.00Drilling, threading or tapping tools, and parts thereof6.2%8205.20Hammers and sledge hammers, and parts thereof:N/A8205.20.30.00With heads not over 1.5 kg each6.2%8205.20.60.00With heads over 1.5 kg eachFree8205.30Planes, chisels, gouges and similar cutting tools for working wood, and parts thereof:N/A8205.30.30.00With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium5.7%8205.30.60.00Other (including parts)5%8205.40.00.00Screwdrivers, and parts thereof6.2%8205.51Household tools, and parts thereof:N/A8205.51.15.00Carving and butcher steels, with or without handlesFree8205.51.30Other (including parts)3.7%8205.51.30.30Kitchen and table implementsN/A8205.51.30.60Other (including parts)N/A8205.51.45.00Of copperFree8205.51.60.00Of aluminum2.2¢/kg + 5%8205.51.75.00Other3.7%8205.59Other:N/A8205.59.10.00Pipe tools, and parts thereof7.2%8205.59.20.00Powder-actuated handtools, and parts thereofFree8205.59.30Crowbars, track tools and wedges, and parts thereofFree8205.59.30.10CrowbarsN/A8205.59.30.80OtherN/A8205.59.45.00Caulking guns5.3%8205.59.55Other5.3%8205.59.55.05Single edge razor blades other than for shavingN/A8205.59.55.10OtherN/A8205.59.55.60Other (including parts)N/A8205.59.60.00Of copperFree8205.59.70.00Of aluminum1.5¢/kg + 3.5%8205.59.80.00Other3.7%8205.60.00.00Blow torches and similar self-contained torches, and parts thereof2.9%8205.70.00Vises, clamps and the like, and parts thereof5%8205.70.00.30PipeN/A8205.70.00.60OtherN/A8205.70.00.90Other (including parts)N/A8205.90Other, including sets of articles of two or more subheadings of this heading:N/A8205.90.10.00Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereofFree8205.90.60.00Sets of articles of two or more of the foregoing subheadingsThe rate of duty applicable to that article in the set subject to the highest rate of duty8206.00.00.00Tools of two or more of headings 8202 to 8205, put up in sets for retail saleThe rate of duty applicable to that article in the set subject to the highest rate of duty8207Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:N/A8207.13.00.00With working part of cermets3.6%8207.19Other, including parts:N/A8207.19.30With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium5%8207.19.30.30Percussion rock drill bitsN/A8207.19.30.60Rotary rock drill bits, core bits and reamersN/A8207.19.30.90OtherN/A8207.19.60Other2.9%8207.19.60.30Percussion rock drill bitsN/A8207.19.60.65With working part of diamondsN/A8207.19.60.70OtherN/A8207.19.60.90OtherN/A8207.20.00Dies for drawing or extruding metal, and parts thereof3.9%8207.20.00.30Diamond wire drawing diesN/A8207.20.00.40Other diesN/A8207.20.00.70PartsN/A8207.30Tools for pressing, stamping or punching, and parts thereof:N/A8207.30.30Suitable for cutting metal, and parts thereof5.7%8207.30.30.20ToolsN/A8207.30.30.50PartsN/A8207.30.60Not suitable for cutting metal, and parts thereof2.9%8207.30.60.32Stamping dies not suitable for cutting metalN/A8207.30.60.62Metal forming dies, including thread-rolling diesN/A8207.30.60.92Other toolsN/A8207.30.60.95PartsN/A8207.40Tools for tapping or threading, and parts thereof:N/A8207.40.30.00With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium5.7%8207.40.60.00Other4.8%8207.50Tools for drilling, other than for rock drilling, and parts thereof:N/A8207.50.20With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium5%8207.50.20.30Masonry drillsN/A8207.50.20.45Brad pointN/A8207.50.20.55OtherN/A8207.50.20.70For woodworkingN/A8207.50.20.80OtherN/A8207.50.40Suitable for cutting metal, and parts thereof8.4%8207.50.40.30Twist drillsN/A8207.50.40.60OtherN/A8207.50.60.00For handtools, and parts thereof5.2%8207.50.80.00Other2.9%8207.60.00Tools for boring or broaching, and parts thereof4.8%8207.60.00.30BroachesN/A8207.60.00.35Reamers, except gun reamersN/A8207.60.00.61Other (including parts thereof)N/A8207.70Tools for milling, and parts thereof:N/A8207.70.30With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium5%8207.70.30.30End milling cuttersN/A8207.70.30.40Router bits for woodworkingN/A8207.70.30.60OtherN/A8207.70.60Other2.9%8207.70.60.30End milling cuttersN/A8207.70.60.40Router bits not suitable for cutting metalN/A8207.70.60.60Other (including parts)N/A8207.80Tools for turning:N/A8207.80.30.00With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium4.8%8207.80.60.00Other3.7%8207.90Other interchangeable tools, and parts thereof:N/A8207.90.15.00Files and rasps, including rotary files and rasps, and parts thereof1.6%8207.90.30Cutting tools with cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium5%8207.90.30.30Hobs and other gear cutting toolsN/A8207.90.30.75Cutterheads with interchangeable toolsN/A8207.90.30.80OtherN/A8207.90.30.85OtherN/A8207.90.45.00Suitable for cutting metal, and parts thereof4.8%8207.90.60.00For handtools, and parts thereof4.3%8207.90.75Other3.7%8207.90.75.45Cutterheads with interchangeable toolsN/A8207.90.75.85OtherN/A8208Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:N/A8208.10.00For metal working, and parts thereofFree8208.10.00.30Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machinesN/A8208.10.00.60Other (including parts)N/A8208.20.00For wood working, and parts thereofFree8208.20.00.30Over 73.7 cm in length, for veneer-cutting machinesN/A8208.20.00.60Over 15.2 cm in length, for wood-chipper machinesN/A8208.20.00.90Other (including parts)N/A8208.30.00For kitchen appliances or for machines used by the food industry, and parts thereofFree8208.30.00.30For meat-slicing, meat-cutting or meat-chopping machinesN/A8208.30.00.60Other (including parts)N/A8208.40For agricultural, horticultural or forestry machines, and parts thereof:N/A8208.40.30.00Lawnmower bladesFree8208.40.60.00Other (including parts)Free8208.90Other:N/A8208.90.30.00For shoe machineryFree8208.90.60.00Other (including parts)Free8209.00.00Plates, sticks, tips and the like for tools, unmounted, of cermets4.6%8209.00.00.30Of sintered metal carbidesN/A8209.00.00.60Of other cermetsN/A8210.00.00.00Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof3.7%8211Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:N/A8211.10.00.00Sets of assorted articlesThe rate of duty applicable to that article in the set subject to the highest rate of duty8211.91Table knives having fixed blades:N/A8211.91.10.00Knives with silver-plated handlesFree8211.91.20.00Valued under 25¢ each, not over 25.9 cm in overall length0.4¢ each + 6.4%8211.91.25.00Other0.4¢ each + 6.8%8211.91.30.00Valued under 25¢ each, not over 25.9 cm in overall length0.9¢ each + 10.6%8211.91.40.00Other0.3¢ each + 3.7%8211.91.50Knives with rubber or plastic handles0.7¢ each + 3.7%8211.91.50.30Steak knivesN/A8211.91.50.60OtherN/A8211.91.80Other0.3¢ each + 4.9%8211.91.80.30Steak knivesN/A8211.91.80.60OtherN/A8211.92Other knives having fixed blades:N/A8211.92.20.00Kitchen and butcher knives0.8¢ each + 4.6%8211.92.40Other1¢ each + 4.6%8211.92.40.50Sheath-type knivesN/A8211.92.40.60OtherN/A8211.92.60.00Hunting knives with wood handles4.4%8211.92.90Other0.4¢ each + 6.1%8211.92.90.30Kitchen and butcher knivesN/A8211.92.90.45Sheath-type knivesN/A8211.92.90.60OtherN/A8211.93.00Knives having other than fixed blades3¢ each + 5.4%8211.93.00.31Folding two-handled multi-use tools in which one or more tools are housed in each handle and one or more of the tools is a folding knife bladeN/A8211.93.00.35Pen knives, pocket knives and other knives which have folding bladesN/A8211.93.00.60Other (including parts)N/A8211.94Blades:N/A8211.94.10.00For knives having fixed blades0.16¢ each + 2.2%8211.94.50.00Other1¢ each + 5.4%8211.95Handles of base metal:N/A8211.95.10.00For table knives having fixed blades0.3¢ each + 4.9%8211.95.50.00For other knives having fixed blades0.4¢ each + 6.1%8211.95.90.00Other3¢ each + 5.4%8212Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:N/A8212.10.00.00RazorsFree8212.20.00Safety razor blades, including razor blade blanks in stripsFree8212.20.00.05Single edge razor blades for shavingN/A8212.20.00.10OtherN/A8212.90.00.00Other partsFree8213.00Scissors, tailors' shears and similar shears, and blades and other base metal parts thereof:N/A8213.00.30.00Valued not over $1.75/dozen1.7¢ each + 4.3%8213.00.60.00Pinking shears, valued over $30/dozen8¢ each + 8%8213.00.90.00Other (including parts)3¢ each + 3%8214Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:N/A8214.10.00.00Paper knives, letter openers, erasing knives, pencil sharpeners (nonmechanical) and blades and other parts thereof0.3¢ each + 4.2%8214.20Manicure or pedicure sets and instruments (including nail files), and parts thereof:N/A8214.20.30.00Cuticle or cornknives, cuticle pushers, nail files, nailcleaners, nail nippers and clippers, all the foregoing used for manicure or pedicure purposes, and parts thereof4%8214.20.60.00In leather containersFree8214.20.90.00Other4.1%8214.90Other:N/A8214.90.30.00Cleavers with their handles1¢ each + 4.9%8214.90.60.00Other0.2¢ each + 3.1%8214.90.90.00Other (including parts)1.4¢ each + 3.2%8215Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:N/A8215.10.00.00Sets of assorted articles containing at least one article plated with precious metalThe rate of duty applicable to that article in the set subject to the highest rate of duty8215.20.00.00Other sets of assorted articlesThe rate of duty applicable to that article in the set subject to the highest rate of duty8215.91Plated with precious metal:N/A8215.91.30.00ForksFree8215.91.60.00Spoons and ladles4.2%8215.91.90.00Other (including parts)2.7%8215.99Other:N/A8215.99.01.00Valued under 25¢ each, not over 25.9 cm in overall length0.9¢ each + 15.8%8215.99.05.00Other0.5¢ each + 8.5%8215.99.10.00Valued under 25¢ each0.5¢ each + 6.3%8215.99.15.00Other0.4¢ each + 4.8%8215.99.20.00With rubber or plastic handles0.5¢ each + 3.2%8215.99.22.00Without their handlesFree8215.99.24.00Table forks (including table serving forks) and barbecue forks with wooden handles0.3¢ each + 4.5%8215.99.26.00Other0.2¢ each + 3.1%8215.99.30.00Spoons valued under 25¢ each14%8215.99.35.00Other6.8%8215.99.40With base metal (except stainless steel) or nonmetal handles5%8215.99.40.30Tablespoons and table ladlesN/A8215.99.40.60OtherN/A8215.99.45.00OtherFree8215.99.50.00Other (including parts)5.3%8301Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys and parts of any of the foregoing articles, of base metal:N/A8301.10Padlocks:N/A8301.10.20.00Not over 3.8 cm in width2.3%8301.10.40.00Over 3.8 cm but not over 6.4 cm in width3.8%8301.10.50.00Over 6.4 cm in width3.6%8301.10.60Not over 3.8 cm in width6.1%8301.10.60.20Lock bodies containing hardened steel components with attached (or insertable) flexible cable composed of wire strands and hardened steel beadsN/A8301.10.60.80OtherN/A8301.10.80.00Over 3.8 cm but not over 6.4 cm in width4.8%8301.10.90.00Over 6.4 cm in width4.2%8301.20.00Locks of a kind used on motor vehicles5.7%8301.20.00.30Non-integral steering wheel immobilizer devicesN/A8301.20.00.60OtherN/A8301.30.00Locks of a kind used for furniture5.7%8301.30.00.60Cam locks and other locks suitable for use with chests, drawers and similar itemsN/A8301.30.00.90OtherN/A8301.40Other locks:N/A8301.40.30.00Luggage locks3.1%8301.40.60Other5.7%8301.40.60.30Door locks, locksets and other locks suitable for use with interior or exterior doors (except garage, overhead or sliding doors)N/A8301.40.60.60OtherN/A8301.50.00.00Clasps and frames with clasps, incorporating locks3.1%8301.60.00Parts2.8%8301.60.00.10Of copper or copper alloys
8301.60.00.60Other
8301.70.00Keys presented separately4.5%8301.70.00.10Of copper or copper alloys
8301.70.00.60Other
8302Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal; and base metal parts thereof:N/A8302.10Hinges, and parts thereof:N/A8302.10.30.00Designed for motor vehicles2%8302.10.60Other3.5%8302.10.60.30Suitable for interior and exterior doors (except garage, overhead or sliding doors)N/A8302.10.60.60Suitable for furniture and cabinetsN/A8302.10.60.90OtherN/A8302.10.90Other3.4%8302.10.90.30Suitable for interior and exterior doors (except garage, overhead or sliding doors)N/A8302.10.90.60Suitable for furniture and cabinetsN/A8302.10.90.90OtherN/A8302.20.00.00Castors, and parts thereof5.7%8302.30Other mountings, fittings and similar articles suitable for motor vehicles; and parts thereof:N/A8302.30.30Of iron or steel, of aluminum or of zinc2%8302.30.30.10Pneumatic cylinders for lifting, lowering, dampening or counter-balancingN/A8302.30.30.60OtherN/A8302.30.60.00Other3.5%8302.41Suitable for buildings:N/A8302.41.30.00Door closers (except automatic door closers), and parts thereof3.9%8302.41.60Of iron or steel, of aluminum or of zinc3.9%8302.41.60.15Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheonsN/A8302.41.60.45OtherN/A8302.41.60.50For curtains, draperies and window shadesN/A8302.41.60.80OtherN/A8302.41.90Other3.5%8302.41.90.15Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheonsN/A8302.41.90.45OtherN/A8302.41.90.50For curtains, draperies and window shadesN/A8302.41.90.80OtherN/A8302.42Other, suitable for furniture:N/A8302.42.30Of iron or steel, of aluminum or of zinc3.9%8302.42.30.10Pneumatic cylinders for lifting, lowering, dampening or counterbalancingN/A8302.42.30.15Drawer slidesN/A8302.42.30.65OtherN/A8302.42.60.00Other3.4%8302.49Other:N/A8302.49.20.00Coated or plated with precious metal7.5%8302.49.40.00OtherFree8302.49.60Of iron or steel, of aluminum or of zinc5.7%8302.49.60.35Pneumatic cylinders for lifting, lowering, dampening or counterbalancingN/A8302.49.60.45For railway vehiclesN/A8302.49.60.55For aircraft, vessels and other vehicles (except motor vehicles) of section XVIIN/A8302.49.60.85OtherN/A8302.49.80Other3.5%8302.49.80.40Of copperN/A8302.49.80.50OtherN/A8302.49.80.90OtherN/A8302.50.00.00Hat-racks, hat pegs, brackets and similar fixtures, and parts thereofFree8302.60Automatic door closers, and parts thereof:N/A8302.60.30.00Automatic door closers3.9%8302.60.90.00Parts3.1%8303.00.00.00Armored or reinforced safes, strong-boxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, and parts thereof, of base metal3.8%8304.00.00.00Desk-top filing or card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment and parts thereof, of base metal, other than office furniture of heading 94033.9%8305Fittings for looseleaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, and parts thereof, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal:N/A8305.10.00Fittings for looseleaf binders or files2.9%8305.10.00.10Ring binder mechanismsN/A8305.10.00.50OtherN/A8305.20.00.00Staples in stripsFree8305.90Other, including parts:N/A8305.90.30Paper clips, and parts thereofFree8305.90.30.10Wholly of wireN/A8305.90.30.50OtherN/A8305.90.60.00Other5.7%8306Bells, gongs and the like, nonelectric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal; and base metal parts thereof:N/A8306.10.00.00Bells, gongs and the like, and parts thereof5.8%8306.21.00.00Plated with precious metal, and parts thereof4.5%8306.29.00.00OtherFree8306.30.00.00Photograph, picture or similar frames; mirrors; and parts thereof2.7%8307Flexible tubing of base metal, with or without fittings:N/A8307.10Of iron or steel:N/A8307.10.30.00With fittings3.8%8307.10.60.00Other3.8%8307.90Of other base metal:N/A8307.90.30.00With fittings3.8%8307.90.60.00Other3.8%8308Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:N/A8308.10.00.00Hooks, eyes and eyelets1.1¢/kg + 2.9%8308.20Tubular or bifurcated rivets:N/A8308.20.30.00Of iron or steel and not brightened, not lathed and not machinedFree8308.20.60.00OtherFree8308.90Other, including parts:N/A8308.90.30.00Beads and spangles of base metalFree8308.90.60.00Buckles and buckle clasps, and parts thereof3.9%8308.90.90.00Other2.7%8309Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, and parts thereof, of base metal:N/A8309.10.00.00Crown corks (including crown seals and caps), and parts thereofFree8309.90.00Other2.6%8309.90.00.20For cans of a kind used for the conveyance of beverages as described in statistical note 1 to this chapterN/A8309.90.00.25OtherN/A8309.90.00.80Of steelN/A8309.90.00.85OtherN/A8310.00.00.00Sign plates, name plates, address plates and similar plates, numbers, letters and other symbols, and parts thereof, of base metal, excluding those of heading 9405Free8311Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:N/A8311.10.00.00Coated electrodes of base metal, for electric arc-weldingFree8311.20.00.00Cored wire of base metal, for electric arc-weldingFree8311.30Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame:N/A8311.30.30.00Lead-tin soldersFree8311.30.60.00OtherFree8311.90.00.00OtherFree